Transport Area Working Group S. Combes Internet-Draft P. Amundsen Intended status: Informational M. Lambert H-P. Lexow SatLabs Group Expires: November 2009 May 11, 2009 The DVB-RCS MIB draft-combes-ipdvb-mib-rcs-05.txt Status of this Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. This document may not be modified, and derivative works of it may not be created, except to format it for publication as an RFC or to translate it into languages other than English. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html This Internet-Draft will expire on November 11, 2009. Abstract This document describes the MIB module for the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS). It defines a set of MIB entities to characterize the behavior and performance of network layer entities deploying DVB-RCS. Combes Expires November 7, 2009 [Page 1] Internet-Draft DVB-RCS MIB May 2009 Table of Contents 1. Introduction...................................................3 2. Conventions used in this document..............................4 2.1. Abbreviations.............................................5 2.2. Glossary..................................................7 2.2.1. Star DVB-RCS network.................................7 2.2.2. Mesh DVB-RCS network.................................7 2.2.3. Transparent DVB-RCS network..........................7 2.2.4. Regenerative DVB-RCS network.........................7 2.2.5. DVB-RCS MAC layer....................................8 2.2.6. DVB-RCS TDM..........................................8 2.2.7. DVB-RCS TDMA.........................................8 2.2.8. IDU..................................................8 2.2.9. ODU..................................................8 2.2.10. RCST................................................8 2.2.11. NCC.................................................9 2.2.12. Configuration file..................................9 2.2.13. Log file............................................9 2.2.14. Installation log file...............................9 2.2.15. Antenna alignment...................................9 2.2.16. CW frequency........................................9 2.2.17. Request Class.......................................9 2.2.18. Channel ID..........................................9 2.2.19. ATM profile........................................10 2.2.20. MPEG profile.......................................10 2.2.21. PID pool...........................................10 2.2.22. Capacity Categories................................10 2.2.23. Start transponder..................................11 2.2.24. DVB-S..............................................11 2.2.25. DVB-S2 and CCM/VCM/ACM.............................11 2.2.26. Interactive Network................................12 3. MIB Module overview...........................................12 3.1. Textual Conventions......................................13 3.2. Structure of the MIB.....................................13 3.3. Relationship to the Interfaces MIB Module................14 3.4. MIB groups description...................................18 3.4.1. dvbRcsRcstSystem....................................18 3.4.2. dvbRcsRcstNetwork...................................19 3.4.3. dvbRcsRcstInstall...................................19 3.4.4. dvbRcsRcstQos.......................................19 3.4.5. dvbRcsRcstControl...................................19 3.4.6. dvbRcsRcstState.....................................20 3.4.7. dvbRcsFwdLink (dvbRcsFwdConfig and dvbRcsFwdStatus groups)....................................................20 Combes Expires November 7, 2009 [Page 2] Internet-Draft DVB-RCS MIB May 2009 3.4.8. dvbRcsRtnLink (dvbRcsRtnConfig and dvbRcsRtnStatus groups)....................................................20 4. Definitions...................................................21 5. Security Considerations.......................................91 6. IANA Considerations...........................................92 7. Acknowledgments...............................................92 8. References....................................................93 8.1. Normative References.....................................93 8.2. Informative References...................................93 9. Authors' Addresses............................................95 10. Disclaimer...................................................95 11. Copyright Notice.............................................96 1. Introduction The SatLabs Group [SATLABS] is an international non-profit EEIG (European Economic Interest Grouping) committed to large-scale adoption and deployment of the Digital Video Broadcasting Return Channel via Satellite (DVB-RCS) standard [ETSI-RCS]. SatLabs members are service providers, satellite operators, system integrators, terminal manufacturers and technology providers with an interest in DVB-RCS. Since its creation in 2001, the main goal of the SatLabs Group has been to achieve interoperability between DVB-RCS terminals and systems. Therefore, the Group has defined the SatLabs Qualification Program that provides an independent certification process for DVB- RCS Terminals based on System Recommendations defined by SatLabs. To enhance products interoperability, beyond the physical and MAC layer mechanisms defined in the DVB-RCS standard, SatLabs has expanded its Recommendations in the field of DVB-RCS terminal management [SATLABS]. As a part of this effort, SatLabs has specified a common SNMP Management Information Base (MIB) for DVB-RCS terminals, which is defined in this document. A DVB-RCS terminal is denoted as a Return Channel Satellite Terminal (RCST) in the remainder of this document. This consists of an Indoor Unit (IDU) and an Outdoor Unit (ODU) connected through an Inter Facility Link (IFL), usually a coaxial L-band interface. On the user side, the IDU is connected to the user network through a Local Area Network (LAN) interface (usually Ethernet). On the network side, the ODU is connected via a satellite link (the Air Interface). The DVB-RCS MIB is implemented in the IDU of an RCST. RCST management can be performed either through the LAN interface (Local Combes Expires November 7, 2009 [Page 3] Internet-Draft DVB-RCS MIB May 2009 management) or through the Air Interface (Remote management from the Network Control Center, NCC). RCST and NCC elements are shown on Figure 1. +------------+ | IP | | End Host | +-----+------+ | - - - - - - - -|- - - - - - - - - - - - - - - - | | LAN interface | | | +------+--------+ | | Indoor Unit | | | (IDU) | | +------+--------+ | | | Inter Facility Link (IFL) | | | +-----+---------+ | | OutDoor Unit | | | (ODU) | | +------+--------+ | | | | Air Interface | - - - - - - - |- - - - - - - - - - - - - - - - RCST | | +----------------+ +------->| Network Control| | Center (NCC) | +----------------+ FIGURE 1: RCST architecture 2. Conventions used in this document This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally Combes Expires November 7, 2009 [Page 4] Internet-Draft DVB-RCS MIB May 2009 accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. 2.1. Abbreviations AAL5 ATM Adaptation Layer Type 5 ACM Adaptive Coding and Modulation (defined in [ETSI-DVBS2]) ATM Asynchronous Transfer Mode AVBDC Absolute Volume-Based Dynamic Capacity BER Bit Error Ratio BUC Block Up-Converter CCM Constant Coding and Modulation CNR Carrier to Noise Ratio CRA Continuous Rate Assignment CSC Common Signalling Channel CW Continuous Wave (carrier frequency) dBi deciBel (isotropic) dBm deciBel (with respect to 1 mW) DSCP DiffServ Code Point ETSI European Telecommunications Standards Institute FEC Forward Error Correction Combes Expires November 7, 2009 [Page 5] Internet-Draft DVB-RCS MIB May 2009 GS Generic Stream GSE Generic Stream Encapsulation IDU InDoor Unit IFL Inter-Facility Link LNB Low Noise Block LO Local Oscillator MAC Medium Access Control MIB Management Information Base MPEG Motion Pictures Expert Group MPE Multi-Protocol Encapsulation NCC Network Control Centre OAM Operations and Management ODU OutDoor Unit PHB Per-Hop Behavior PEP Performance Enhancing Proxy PID Packet IDentifier (MPEG, used as Program Identifier in DVB) QoS Quality of Service RBDC Rate-Based Dynamic Capacity RC Request Class RCST Return Channel via Satellite Terminal (DVB-RCS Terminal) Rx Receive SDU Service Data Unit SSPA Solid State Power Amplifier TDM Time Division Multiplex Combes Expires November 7, 2009 [Page 6] Internet-Draft DVB-RCS MIB May 2009 TDMA Time Division Multiple Access TS Transport Stream (as defined by MPEG) Tx Transmit VBDC Volume-Based Dynamic Capacity VCI Virtual Channel Identifier (ATM) VPI Virtual Path Identifier (ATM) Vpp Volts peak-to-peak 2.2. Glossary The terms in this document are derived either from DVB-RCS standard specifications [ETSI-RCS] or from SatLabs System Recommendations [SATLABS]. 2.2.1. Star DVB-RCS network This denotes a hub-and-spoke configuration where all communications pass through a central hub, that usually also includes the NCC. Peer- to-peer communication between RCSTs is possible, but through a double satellite hop (this traffic has to pass through the hub). 2.2.2. Mesh DVB-RCS network This denotes a mesh configuration that supports peer-to-peer communications in a single satellite hop directly between RCSTs. 2.2.3. Transparent DVB-RCS network This denotes a network using transparent satellite transponders. Star or mesh network configurations can be supported. In the case of a mesh configuration, RCSTs need to incorporate a TDMA receiver in addition to the TDM receiver. 2.2.4. Regenerative DVB-RCS network This denotes a network using regenerative satellite transponders, i.e. including some On-Board Processing functionality allowing demodulation and decoding of the uplink TDMA signals and re-multiplex Combes Expires November 7, 2009 [Page 7] Internet-Draft DVB-RCS MIB May 2009 the traffic on the downlink. Star or mesh network configurations can be supported. 2.2.5. DVB-RCS MAC layer The DVB-RCS MAC Layer represents the air interface of an RCST, as specified in [ETSI-RCS]. The interface is bi-directional and supports IP traffic over hub-spoke (star) and mesh satellite network topologies. 2.2.6. DVB-RCS TDM The DVB-RCS TDM corresponds to the forward link of a DVB-RCS transparent system or the downlink of a DVB-RCS regenerative system. It is based on either the DVB-S or DVB-S2 standard specified in [ETSI-DVBS] and [ETSI-DVBS2], respectively. In the DVB-RCS context, this interface is uni or bi-directional, as it may also be used for a return channel dedicated to a single terminal. 2.2.7. DVB-RCS TDMA The DVB-RCS TDMA corresponds to the return or mesh link of a RCS transparent system or the uplink of a RCS regenerative system. It is specified in [ETSI-RCS]. In the context of star transparent and mesh regenerative DVB-RCS systems, this interface is uni-directional. In the context of mesh transparent DVB-RCS systems, this interface is bi-directional. 2.2.8. IDU This is the indoor part of the RCST (including at least the power supply, and usually also the modem and networking functions). 2.2.9. ODU This is the outdoor part of the RCST (including at least the aerial, and usually also the LNB and BUC). 2.2.10. RCST This is the Satellite Terminal, installed on the customer premises. It is composed of the IDU and ODU. Combes Expires November 7, 2009 [Page 8] Internet-Draft DVB-RCS MIB May 2009 2.2.11. NCC The NCC provides Control and Monitoring Functions. It generates control and timing signals for the operation of the DVB-RCS Network. 2.2.12. Configuration file The configuration file is XML formatted file, storing configuration parameters for the RCST and their values. 2.2.13. Log file The log file is stored at the RCST. This is used to log particular events that occur on RCST side. 2.2.14. Installation log file The installation log file is stored at the RCST. This logs particular events that occur on RCST side, related to RCST installation phase. 2.2.15. Antenna alignment This is the process to align the RCST antenna, part of the ODU, in order to enable bi-directional communication (uplink, downlink) with the satellite network. 2.2.16. CW frequency The CW frequency is the frequency of a Continuous Wave signal. It is a narrowband carrier transmitted for the duration of measurements during the installation of a RCST. 2.2.17. Request Class A Request Class (RC) is a representation of a Per Hop Behavior (PHB) at the MAC layer. It defines a behavior of the MAC layer for a given aggregation of traffic. This behavior includes a combination of Capacity Categories associated to the RC and a Priority with respect to the other RCs supported by a RCST. 2.2.18. Channel ID Each Request Class is identified by a unique Channel_ID in the communication between the RCST and the NCC. Combes Expires November 7, 2009 [Page 9] Internet-Draft DVB-RCS MIB May 2009 2.2.19. ATM profile The ATM profile is one of the two profiles for traffic burst format on a DVB-RCS uplink. It is based on one or more concatenated ATM cells, each of length 53 bytes, plus an optional prefix. 2.2.20. MPEG profile The MPEG profile is one of the two profiles for traffic burst format on the DVB-RCS uplink. It is based on a number of concatenated MPEG2- TS packets, each of length 188 bytes. 2.2.21. PID pool For the MPEG profile several RCs may be mapped within a pool of several PIDs to allow cross-RC Section Packing [RFC4259]. Section packing can be used on all PIDs and higher priority traffic can always pre-empt lower priority streams. This reduces the need for padding. 2.2.22. Capacity Categories The TDMA timeslot allocation process for the DVB-RCS uplink supports several capacity categories. The Capacity Categories CRA, RBDC and A/VBDC, when authorized for a RC, have to be configured from the NCC. These configuration parameters are used to inform the RCST of the configuration of each Category at the NCC side and thus help in Capacity Requests computation. The configuration of these parameters is performed for each RC. A SatLabs optional feature is defined that allows their configuration at the RCST level in addition to configuration per RC. This feature is denoted RCST_PARA. 2.2.22.1. Continuous Rate Assignment (CRA) CRA is a rate capacity that is provided in full in a continuous manner to the RCST while required. 2.2.22.2. Rate-Based Dynamic Capacity (RBDC) RBDC is rate capacity that is requested dynamically by an RCST. RBDC capacity is provided in response to explicit requests from the RCST to the NCC, such requests being absolute (i.e. corresponding to the full rate currently being requested). Each request overrides all Combes Expires November 7, 2009 [Page 10] Internet-Draft DVB-RCS MIB May 2009 previous RBDC requests from the same RCST, and is subject to a maximum rate limit. 2.2.22.3. Volume-Based Dynamic Capacity (VBDC) VBDC is volume capacity that is requested dynamically by an RCST. VBDC capacity is provided in response to explicit requests from the RCST to the NCC, such requests being cumulative (i.e. each request adds to all previous requests from the same RCST). 2.2.22.4. Absolute Volume-Based Dynamic Capacity (AVBDC) AVBDC is volume capacity that is requested dynamically by an RCST. This capacity is provided in response to explicit requests from the RCST to the NCC, such requests being absolute (i.e. this request replaces the previous ones from the same RCST). The combination of AVBDC and VBDC is seen as a single Capacity Category, denoted A/VBDC. 2.2.22.5. Population ID This defines a group of RCSTs within a Network. 2.2.23. Start transponder This is the satellite transponder on which the communication is initiated from a RCST point-of-view when in the installation mode. The parameters corresponding to this transponder (satellite orbital position, frequency, etc.) are stored at the RCST as power-up configuration data. 2.2.24. DVB-S DVB-S is the Digital Video Broadcast over Satellite [ETSI-DVBS]. It is a framework and set of associated standards published by ETSI for the transmission of video, audio, and data, using the ISO MPEG-2 Standard [ISO-MPEG], over satellite links. 2.2.25. DVB-S2 and CCM/VCM/ACM DVB-S2 is the Second Generation of the Digital Video Broadcast for Satellite applications standard [ETSI-DVBS2]. It is a framework and set of associated standards published by ETSI for the transmission of video, audio and data. BBFRAME: The main framing unit of the DVB-S2 protocol stack. Combes Expires November 7, 2009 [Page 11] Internet-Draft DVB-RCS MIB May 2009 CCM: In CCM transmission mode, the forward link uses a constant set of transmission parameters (FEC coding rate and modulation scheme) for all receivers. VCM: In VCM transmission mode, the forward link uses transmission parameters which are variable on a BBFRAME-by-BBFRAME, but fixed on a Receiver basis, according to fixed link and propagation conditions for each Receiver. ACM: In ACM transmission mode, the forward link uses transmission parameters which are dynamically adjusted on a BBFRAME-by-BBFRAME and Receiver-per-Receiver basis, according to actual link and propagation conditions. In order to implement ACM, feedback from each Receiver has to be provided by DVB-RCS return channel. 2.2.26. Interactive Network This is another name for a DVB-RCS based satellite network. 3. MIB Module overview This MIB module provides a set of objects required for the management of SatLabs-compliant RCST. The specification is derived from the parameters and protocols described in [SATLABS]. The MIB module in this document uses the following OBJECT IDENTIFIER values as already assigned by IANA under the smi-numbers registry [IANA]: +------------+---------------------------+ | Descriptor | OBJECT IDENTIFIER value | +------------+---------------------------+ |dvbRcsMib |{ mib-2 transmission 239 } | +------------+---------------------------+ TABLE 1: Object Identifiers for the MIB These values have been assigned for this MIB under the 'mib- 2.transmission' subtree. Combes Expires November 7, 2009 [Page 12] Internet-Draft DVB-RCS MIB May 2009 3.1. Textual Conventions This MIB module defines new textual conventions for RCST indications of SatLabs defined capabilities, including profiles, options and optional features. DvbRcsSystemSatLabsProfileMap represents the SatLabs profiles supported as defined in [SATLABS]. DvbRcsSystemSatLabsOptionMap represents the SatLabs options supported as defined in [SATLABS]. These are options that are used for the certification of SatLabs terminals. They represent important functionality, with impact on interoperability, and their support is advertised with the RCST certification level. DvbRcsSystemSatLabsFeatureMap represents the SatLabs optional features supported as defined in [SATLABS]. These represent minor features, not necessary for interoperability. They are not used for the certification of SatLabs terminals. 3.2. Structure of the MIB This MIB module is structured into two top level groups: o The dvbRcsMibObjects group includes all the managed objects of the DVB-RCS MIB. o The dvbRcsConformance group includes the compliance statements for DVB-RCS terminals that are compliant with [SATLABS]. The managed objects are grouped into formal object groups (i.e. units of conformance) according to the relation to specific SatLabs options or features. The conformance statements (MODULE-COMPLIANCE specification) are described within the dvbRcsRcstCompliances group while the units of conformance are described within the dvbRcsRcstGroups group. The dvbRcsMibObjects group is further structured into three groups: dvbRcsRcst, dvbRcsFwdLink and dvbRcsRtnLink. The dvbRcsRcst group covers management related to the RCST equipment. It is structured into six groups: o dvbRcsRcstSystem o dvbRcsRcstNetwork o dvbRcsRcstInstall Combes Expires November 7, 2009 [Page 13] Internet-Draft DVB-RCS MIB May 2009 o dvbRcsRcstQos o dvbRcsRcstControl o dvbRcsRcstState The dvbRcsFwdLink group covers management information related to the RCST forward link. It is structured into two groups: o dvbRcsFwdConfig o dvbRcsFwdStatus The dvbRcsRtnLink group covers management information related to the RCST return link. It is structured into two groups: o dvbRcsRtnConfig o dvbRcsRtnStatus Tables within each of these groups cover different functions like return link traffic management (packet classes, Request Classes, PID pools) and forward links configuration and status. Rows created automatically (e.g., by the device according to the hardware configuration) may and generally will have a mixture of configuration and status objects within them. Rows that are meant to be created by the management station are generally restricted to configuration (read-create) objects. 3.3. Relationship to the Interfaces MIB Module This section clarifies the relationship of this MIB module to the Interfaces MIB [RFC2863]. Several areas of correlation are addressed in the following. The implementer is referred to the Interfaces MIB document in order to understand the general intent of these areas. IANA has assigned three ifType labels for DVB-RCS. Each RCST MUST support at least the three following interfaces: o dvbRcsMacLayer (239), -- DVB-RCS MAC Layer DVB-RCS MAC Layer represents the complete air interface of an RCST, as specified in [ETSI-RCS]. This interface supports star and mesh networks and is bi-directional. Only star networks are considered by the present MIB module. Combes Expires November 7, 2009 [Page 14] Internet-Draft DVB-RCS MIB May 2009 o dvbTdm (240), -- DVB Satellite TDM DVB-RCS Physical link based on Time Division Multiplexing. It corresponds to the forward link of a RCS transparent system or the downlink of a RCS regenerative system. It is based on either DVB-S or DVB-S2 standard specified in [ETSI-DVBS] and [ETSI-DVBS2]. Only transparent systems are considered by the present MIB module. In the DVB-RCS context, this interface is uni or bi-directional. In the present MIB module, only a uni-directional (i.e. forward link, or downstream) dvbTdm interface is considered. o dvbRcsTdma (241), -- DVB-RCS TDMA DVB-RCS Physical link based on Time Division Multiple Access. It corresponds to the return or mesh link of a RCS transparent system or the uplink of a RCS regenerative system. It is based on the DVB- RCS standard specified in [ETSI-RCS]. In the context of star transparent and mesh regenerative DVB-RCS systems, this interface is uni-directional. In the context of mesh transparent DVB-RCS systems, this interface is bi-directional. Only star transparent systems are considered by the present MIB module (i.e. return link, or upstream). The protocol stack (as reflected in ifStackTable) will be as follows: +--------------------------+ | IP | +--------------------------+ | dvbRcsMacLayer | +---------------+----------+ | dvbRcsTdma | dvbTdm | +---------------+----------+ | MPEG/ATM | MPEG/GS | +---------------+----------+ FIGURE 2: RCST protocol stack Combes Expires November 7, 2009 [Page 15] Internet-Draft DVB-RCS MIB May 2009 An additional Ethernet interface is used on the LAN side of the RCST (see Figure 1). An instance of ifEntry exists for each dvbTdm interface, for each dvbRcsTdma (normally only one), and for each dvbRcsMac layer (normally only one). The interface counters relate to: o dvbRcsMacLayer: DVB-RCS two-way MAC interface that counts aggregate Multi-Protocol Encapsulation (MPE) frames, Generic Stream Encapsulation (GSE) encapsulated PDUs (equals IP packets), and ATM Adaptation Layer 5 (AAL5) frames. MPE is specified in [ETSI-DAT] and is transported over MPEG, which is specified in [ISO-MPEG]. MPEG is transported over GS or TS (Transport Stream) carriers. The TS carrier is specified in [ETSI-DVBS] for DVB- S and [ETSI-DVBS2] for DVB-S2. GSE is specified in [ETSI-GSE] and is transported over the GS (Generic Stream) carrier, which is specified in [ETSI-DVBS2]. ATM is specified in [ITU-ATM]. AAL5 is specified in [ITU-AAL5]. o dvbTdm: The DVB-RCS TDM interface that counts MPEG TS packets at stream level, if the TS format is used. If the Generic Stream (GS) format is used, it counts GSE packets. o dvbRcsTdma: The DVB-RCS TDMA interface that counts aggregate ATM and MPEG TS packets. The ifStackTable [RFC2863] MUST be implemented to identify the relationships among sub-interfaces. The following example is a DVB-RCS star network with DVB-S and DVB- RCS. As illustrated on Figure 3, it shows a DVB-RCS MAC interface with one downstream and one upstream interface. In this network, ATM encapsulation is used in the DVB-RCS uplink. Two ATM Logical Ports are shown. DVB-S2 or DVB-S can be used in the downlink. ifType 214 'mpegTransport' can also be used for counting TS packets and bytes for subinterfaces of dvbRcsTdma or dvbTdm, e.g. per PID oriented or per TS oriented as desired and applicable. Combes Expires November 7, 2009 [Page 16] Internet-Draft DVB-RCS MIB May 2009 +----------------------------------------------------------+ | IP Network Layer | +------+----------------------------------+----------------+ | | +------+-------+ +------------------+----------------+ | Ethernet LAN | | dvbRcsMacLayer | +--------------+ +-------------+---------------------+ | | +-------------+-----------+ +---+---+ | dvbRcsTdma | |dvbTdm | +-----+-------------+-----+ +-------+ | | +-----+-----+ +-----+-----+ |atm-logical| |atm-logical| +-----------+ +-----------+ FIGURE 3: Example stacking As can be seen from this example, the dvbRcsMacLayer interface is layered on top of the downstream and upstream interfaces, and the upstream interface is layered on top of upstream ATM logical links. In this example, the assignment of index values could be as follows: ifIndex ifType Description 2 dvbRcsMacLayer (239) DVB-RCS MAC Layer 3 dvbRcsTdma (241) DVB-RCS TDMA Upstream 4 dvbTdm(240) DVB-RCS TDM Downstream 5 atm-logical(80) ATM Logical Port 6 atm-logical(80) ATM Logical Port The corresponding ifStack entries would then be: Combes Expires November 7, 2009 [Page 17] Internet-Draft DVB-RCS MIB May 2009 +--------------------+-------------------+ | IfStackHigherLayer | ifStackLowerLayer | +--------------------+-------------------+ | 0 | 1 | | 0 | 2 | | 1 | 0 | | 2 | 3 | | 2 | 4 | | 3 | 5 | | 3 | 6 | | 4 | 0 | | 5 | 0 | | 6 | 0 | +--------------------+-------------------+ TABLE 2: Example ifStack entries 3.4. MIB groups description 3.4.1. dvbRcsRcstSystem The MIB objects in this group gather some basic information that would allow anyone to trace the history - the life - of the RCST as well as to get a complete description of its constitution on the component point of view, including the SatLabs options/features support statement. Many of the parameters will be defined at installation. This group contains description parameters related to the RCST type (ODU type) and location. These parameters are believed to stay unchanged once it has been defined during installation. Modification of hardware equipment, maintenance operations and geographical re- location may require an update of those MIB objects. Note that dvbRcsRcstSystem. dvbRcsSystemLocation object gives the location of the ODU antenna, which is needed for network operation, while the system.sysLocation (MIB-II SNMP OID) provides the location of the IDU unit, which can not be used for the same purpose. The RCST must provide either Read-Write access to dvbRcsSystemOdu parameters or, alternatively, provide the list of supported devices through the rcstOduListGroup (see conformance section). This group of parameters, defined in dvbRcsRcstSystem group, allows the selection by the RCST installer of the actual ODU type. In such a case, the installer must set dvbRcsOduTxType, dvbRcsOduRxType and Combes Expires November 7, 2009 [Page 18] Internet-Draft DVB-RCS MIB May 2009 dvbRcsOduAntennaType according to the selected BUC, LNB and antenna respectively. 3.4.2. dvbRcsRcstNetwork This group contains all the MIB objects related to network parameters. In this subgroup, two objects have been defined in order to differentiate between control and user traffic and associate them with a physical interface. Both dvbRcsRcstNetwork. dvbRcsNetworkLanIpAddress (Traffic) and dvbRcsRcstNetwork. dvbRcsNetworkOamIpAddress (OAM) provide the value of the IP address of, respectively, the user traffic and the control and management traffic. 3.4.3. dvbRcsRcstInstall This group contains all the information related to the RCST installation and commissioning. Many parameters are believed to stay unchanged once it has been defined during installation. Modification of hardware equipment, maintenance operations and geographical re- location may require an update of those MIB objects. 3.4.4. dvbRcsRcstQos This group contains objects to configure the Quality of Service (QoS) of the RCST by the NCC. The dvbRcsPktClass table defines the packet classification for IP layer 3 classifications. Each dvbRcsPktClass entry is mapped to a dvbRcsPhbEntry in the dvbRcsPhbMappingTable. The dvbRcsPhbMappingTable makes the relation between a packet classification entry, a Per-Hop Behavior (PHB) identifier and a Request class entry. The dvbRcsRequestClassTable defines all the layer 2 DVB-RCS QoS parameters. 3.4.5. dvbRcsRcstControl This MIB group contains objects a network manager can use to invoke actions and tests supported by the RCST agent and to retrieve the action/test results. Combes Expires November 7, 2009 [Page 19] Internet-Draft DVB-RCS MIB May 2009 3.4.6. dvbRcsRcstState This MIB group describes the fault state, software versions and configuration file versions of the RCST. 3.4.7. dvbRcsFwdLink (dvbRcsFwdConfig and dvbRcsFwdStatus groups) This MIB group contains parameters that enable the NCC to have access to data about the forward link. Configuration information is kept into the dvbRcsFwdLink. dvbRcsFwdConfig subgroup. Status information is kept into the dvbRcsFwdLink.dvbRcsFwdStatus subgroup. The information in dvbRcsFwdLink.dvbRcsFwdConfig.dvbRcsFwdStartTable is used for the first time the RCST tries to acquire the forward link. All these objects values are aligned with the Satellite Delivery System Descriptor in the Network Information Table (NIT) table [ETSI-SI]. The objects in the dvbRcsFwdLink.dvbRcsFwdConfig.dvbRcsFwdStatusTable are aligned with the satellite forward path descriptor form the RCS Map Table (RMT) [ETSI-RCS] and with the Physical Layer (PL) Header [ETSI-DVBS2], which specified the MODCOD (modulation and FEC rate) and the Type (frame length short of long and the presence/absence of pilots). 3.4.8. dvbRcsRtnLink (dvbRcsRtnConfig and dvbRcsRtnStatus groups) This MIB group contains parameters that enable the NCC to have access to data about the return link. Configuration information is kept into the dvbRcsRtnLink. dvbRcsRtnConfig subgroup. Status information is kept into the dvbRcsRtnLink.dvbRcsrtnStatus subgroup. The RCST is only able to deal with one return link at a time. Hence, there is no need to define a table to collect the different SNMP objects, as it is done for the forward. Combes Expires November 7, 2009 [Page 20] Internet-Draft DVB-RCS MIB May 2009 4. Definitions DVBRCS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, Integer32, IpAddress, transmission, OBJECT-TYPE FROM SNMPv2-SMI -- [RFC2578] TEXTUAL-CONVENTION, DisplayString, RowStatus FROM SNMPv2-TC -- [RFC2579] OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF; -- [RFC2580] dvbRcsMib MODULE-IDENTITY LAST-UPDATED "200902251200Z" ORGANIZATION "The SatLabs Group" CONTACT-INFO "The SatLabs Group Web: www.satlabs.org E-mail: info@satlabs.org" DESCRIPTION "DVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST) defined in the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS) standard (ETSI EN 301 791 Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems, European Telecommunications Standards Institute (ETSI)). It defines a set of MIB entities to characterise the behaviour and performance of network layer entities implementing DVB-RCS. This MIB module is intended to be used by DVB-RCS equipment following the SatLabs System Recommendations, defined by the SatLabs Group and available at www.satlabs.org." Combes Expires November 7, 2009 [Page 21] Internet-Draft DVB-RCS MIB May 2009 REVISION "200902251200Z" DESCRIPTION "Revision of this MIB module, following comments from ipdvb WG." ::= { transmission 239 } --=================================================================== -- Textual Conventions --=================================================================== DvbRcsSatLabsProfileMap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the declaration of the SatLabs defined terminal profiles. (0) refers to the most significant bit." REFERENCE "SatLabs System Recommendations available at www.satlabs.org" SYNTAX BITS { dvbs(0), dvbs2ccm(1), dvbs2acm(2), spare1(3), spare2(4), spare3(5), spare4(6), spare5(7), spare6(8), spare7(9), spare8(10), spare9(11), spare10(12), spare11(13), spare12(14), spare13(15), spare14(16), spare15(17), spare16(18), spare17(19), spare18(20), spare19(21), Combes Expires November 7, 2009 [Page 22] Internet-Draft DVB-RCS MIB May 2009 spare20(22), spare21(23), spare22(24), spare23(25), spare24(26), spare25(27), spare26(28), spare27(29), spare28(30), spare29(31) } DvbRcsSatLabsOptionMap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the declaration of the SatLabs defined options. (0) refers to the most significant bit." REFERENCE "SatLabs System Recommendations available at www.satlabs.org" SYNTAX BITS { mpegTrf(0), coarseSync(1), wideHop(2), fastHop(3), dynamicMfTdma(4), contentionSync(5), qpskLow(6), mod16Apsk(7), mod32Apsk(8), normalFec(9), multiTs(10), gsTs(11), enhQoS(12), pep(13), http(14), ftp(15), dns(16), chIdStrict(17), nlid(18), snmpMisc(19), Combes Expires November 7, 2009 [Page 23] Internet-Draft DVB-RCS MIB May 2009 spare1(20), spare2(21), spare3(22), spare4(23), spare5(24), spare6(25), spare7(26), spare8(27), spare9(28), spare10(29), spare11(30), spare12(31) } DvbRcsSatLabsFeatureMap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention enumerates the declaration of the SatLabs specified compatibility and configuration features. (0) refers to the most significant bit." REFERENCE "SatLabs System Recommendations available at www.satlabs.org" SYNTAX BITS { rcstPara(0), installLog(1), enhClassifier(2), routeId(3), spare1(4), spare2(5), spare3(6), spare4(7), spare5(8), spare6(9), spare7(10), spare8(11), spare9(12), spare10(13), spare11(14), spare12(15), spare13(16), Combes Expires November 7, 2009 [Page 24] Internet-Draft DVB-RCS MIB May 2009 spare14(17), spare15(18), spare16(19), spare17(20), spare18(21), spare19(22), spare20(23), spare21(24), spare22(25), spare23(26), spare24(27), spare25(28), spare26(29), spare27(30), spare28(31) } --=================================================================== -- object type definitions --=================================================================== dvbRcsMibObjects OBJECT IDENTIFIER ::= {dvbRcsMib 1} dvbRcsConformance OBJECT IDENTIFIER ::= {dvbRcsMib 2} dvbRcsRcst OBJECT IDENTIFIER ::= {dvbRcsMibObjects 1} dvbRcsFwdLink OBJECT IDENTIFIER ::= {dvbRcsMibObjects 2} dvbRcsRtnLink OBJECT IDENTIFIER ::= {dvbRcsMibObjects 3} dvbRcsRcstSystem OBJECT IDENTIFIER ::= {dvbRcsRcst 1} dvbRcsRcstNetwork OBJECT IDENTIFIER ::= {dvbRcsRcst 2} dvbRcsRcstInstall OBJECT IDENTIFIER ::= {dvbRcsRcst 3} dvbRcsRcstQos OBJECT IDENTIFIER ::= {dvbRcsRcst 4} dvbRcsRcstControl OBJECT IDENTIFIER ::= {dvbRcsRcst 5} dvbRcsRcstState OBJECT IDENTIFIER ::= {dvbRcsRcst 6} dvbRcsFwdConfig OBJECT IDENTIFIER ::= {dvbRcsFwdLink 1} dvbRcsFwdStatus OBJECT IDENTIFIER ::= {dvbRcsFwdLink 2} dvbRcsRtnConfig OBJECT IDENTIFIER ::= {dvbRcsRtnLink 1} dvbRcsRtnStatus OBJECT IDENTIFIER ::= {dvbRcsRtnLink 2} --=================================================================== Combes Expires November 7, 2009 [Page 25] Internet-Draft DVB-RCS MIB May 2009 --- dvbRcsRcstSystem sub-tree object types --=================================================================== dvbRcsSystemMibRevision OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows the SNMP agent to report the implemented MIB module revision. The supported REVISION of this module is reported." ::= {dvbRcsRcstSystem 1} --=================================================================== -- Options declared according to the textual conventions --=================================================================== dvbRcsSystemSatLabsProfilesDeclaration OBJECT-TYPE SYNTAX DvbRcsSatLabsProfileMap MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the SatLabs profiles supported as defined in the SatLabs System Recommendations. A value of 1 indicates that the respective option is supported. The mapping to the profiles is to be understood as described here. (0) refers to the most significant bit. dvbs(0) -> DVBS profile (DVB-S support) dvbs2ccm(1) -> DVB-S2 CCM profile (CCM support) dvbs2acm(2) -> DVB-S2 ACM profile (CCM, VCM and ACM support)" REFERENCE "SatLabs System Recommendations available at www.satlabs.org" ::= {dvbRcsRcstSystem 2} dvbRcsSystemSatLabsOptionsDeclaration OBJECT-TYPE SYNTAX DvbRcsSatLabsOptionMap MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the SatLabs options supported as defined in the SatLabs System Recommendations. A value of 1 indicates that Combes Expires November 7, 2009 [Page 26] Internet-Draft DVB-RCS MIB May 2009 the respective option is supported. The mapping to the options is to be understood as described here.(0) refers to the most significant bit. mpegTrf(0) -> MPEG_TRF coarseSync(1) -> COARSE_SYNC wideHop(2) -> WIDE_HOPP fastHop(3) -> FAST_HOPP dynamicMfTdma(4) -> Dynamic_MF_TDMA contentionSync(5) -> CONTENTION_SYNC qpskLow(6) -> QPSKLOW mod16Apsk(7) -> 16APSK mod32Apsk(8) -> 32APSK normalFec(9) -> NORMALFEC multiTs(10) -> MULTITS gsTs(11) -> GSTS enhQoS(12) -> ENHQOS pep(13) -> PEP http(14) -> HTTP ftp(15) -> FTP dns(16) -> DNS chIdStrict(17) -> CHID_STRICT nlid(18) -> NLID snmpMisc(19) -> SNMPMISC The support of specific options mandates the support of specific objects and access levels." REFERENCE "SatLabs System Recommendation available at www.satlabs.org" ::= {dvbRcsRcstSystem 3} dvbRcsSystemSatLabsFeaturesDeclaration OBJECT-TYPE SYNTAX DvbRcsSatLabsFeatureMap MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the optional compatibility features and minor options supported as defined in the SatLabs System Recommendations. A value of 1 indicates that the respective feature is supported. The mapping to the features is to be understood as described here. (0) refers to the most Combes Expires November 7, 2009 [Page 27] Internet-Draft DVB-RCS MIB May 2009 significant bit. rcstPara(0) -> RCST_PARA feature installLog(1) -> INSTALL_LOG feature enhClassifier(2) -> ENHCLASSIFIER feature routeId(3) -> ROUTE_ID feature The support of specific features mandates the support of specific objects and access levels." REFERENCE "SatLabs System Recommendation available at www.satlabs.org" ::= {dvbRcsRcstSystem 4} dvbRcsSystemLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Physical location of the ODU antenna expressed as Longitude, Latitude and Altitude. The string shall have 31 characters in the following format: ,,,,,M where x, y and z represents digits, a=N or S, b=E or W, Reading the digits from left to right: 'x' 7 latitude digits; x digits 1-2 contain the degrees, x digits 3-7 contain the minutes in decimal; 'y' 8 longitude digits; y digits 1-3 contain the degrees, y digits 4-8 contain the minutes in decimal; ''' 5 altitude digits; meters above sea level in decimal; '.' is the decimal point; ',' is the field separator; 'M' is the indicator for altitude meters. This format is a modified subset of the NMEA 0183 (National Marine Electronics Association, Interface Standard) format for Global Positioning System Fix Data. This location and the satellite position are used to Combes Expires November 7, 2009 [Page 28] Internet-Draft DVB-RCS MIB May 2009 calculate the RCST-satellite path delay. Note: The system.sysLocation object of MIB-II provides physical location of the IDU unit." ::= {dvbRcsRcstSystem 5} dvbRcsSystemOduAntennaSize OBJECT-TYPE SYNTAX DisplayString UNITS "cm" MAX-ACCESS read-write STATUS current DESCRIPTION "Diameter of the antenna." ::= {dvbRcsRcstSystem 6} dvbRcsSystemOduAntennaGain OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 dBi" MAX-ACCESS read-write STATUS current DESCRIPTION "Antenna peak gain of the ODU." ::= {dvbRcsRcstSystem 7} dvbRcsSystemOduSspa OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 W" MAX-ACCESS read-write STATUS current DESCRIPTION "Power level of the Solid State Power Amplifier installed in the ODU." ::= {dvbRcsRcstSystem 8} dvbRcsSystemOduTxType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Type of transmitter installed in the ODU." ::= {dvbRcsRcstSystem 9} Combes Expires November 7, 2009 [Page 29] Internet-Draft DVB-RCS MIB May 2009 dvbRcsSystemOduRxType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Type of LNB installed in the ODU, with information such as vendor type, output type (single, twin, quad,...), etc." ::= {dvbRcsRcstSystem 10} dvbRcsSystemOduRxBand OBJECT-TYPE SYNTAX INTEGER { oduHighRxBand (0), oduLowRxBand (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "LNB High-Band/Low-Band selector. High Band corresponds to the emission of a 18-26 kHz tone with 0.4-0.8 Vpp in the Rx IFL cable: (0) - High Band (1) - Low Band" ::= {dvbRcsRcstSystem 11} dvbRcsSystemOduRxLO OBJECT-TYPE SYNTAX Integer32 UNITS "x100 Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency of LNB Local Oscillator (in 100 Hz)" ::= {dvbRcsRcstSystem 12} dvbRcsSystemOduTxLO OBJECT-TYPE SYNTAX Integer32 UNITS "x100 Hz" MAX-ACCESS read-write STATUS current DESCRIPTION Combes Expires November 7, 2009 [Page 30] Internet-Draft DVB-RCS MIB May 2009 "Frequency of Block Up-Converter Local Oscillator (in 100 Hz)." ::= {dvbRcsRcstSystem 13} dvbRcsSystemIduPep OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 14} dvbRcsTcpPep OBJECT-TYPE SYNTAX INTEGER{ disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status and control of embedded TCP PEP. 0 - disabled or not implemented 1 - enabled" ::={dvbRcsSystemIduPep 1} dvbRcsHttpPep OBJECT-TYPE SYNTAX INTEGER{ disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status and control of embedded HTTP PEP. 0 - disabled or not implemented 1 - enabled" ::={dvbRcsSystemIduPep 2} --=================================================================== -- ODU structural entities --=================================================================== dvbRcsOduTx OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 15} dvbRcsOduRx OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 16} dvbRcsOduAntenna OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 17} --=================================================================== Combes Expires November 7, 2009 [Page 31] Internet-Draft DVB-RCS MIB May 2009 -- ODU BUC --=================================================================== dvbRcsOduTxTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsOduTxTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the identification of each well-known BUC type supported by the IDU, and provides its associated index." ::={dvbRcsOduTx 1} dvbRcsOduTxTypeEntry OBJECT-TYPE SYNTAX DvbRcsOduTxTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the BUC type table." INDEX { dvbRcsTxTypeIndex } ::={dvbRcsOduTxTypeTable 1} DvbRcsOduTxTypeEntry ::= SEQUENCE { dvbRcsTxTypeIndex Integer32, dvbRcsTxTypeDescription DisplayString } dvbRcsTxTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the BUC type." ::={dvbRcsOduTxTypeEntry 1} dvbRcsTxTypeDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Text based identification of a BUC type." ::={dvbRcsOduTxTypeEntry 2} Combes Expires November 7, 2009 [Page 32] Internet-Draft DVB-RCS MIB May 2009 dvbRcsOduTxType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the selected BUC type." ::={dvbRcsOduTx 2} --=================================================================== -- ODU LNB --=================================================================== dvbRcsOduRxTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsOduRxTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the identification of each well-known LNB type supported by the IDU, and provides its associated index." ::={dvbRcsOduRx 1} dvbRcsOduRxTypeEntry OBJECT-TYPE SYNTAX DvbRcsOduRxTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LNB type table." INDEX { dvbRcsRxTypeIndex } ::={dvbRcsOduRxTypeTable 1} DvbRcsOduRxTypeEntry ::= SEQUENCE { dvbRcsRxTypeIndex Integer32, dvbRcsRxTypeDescription DisplayString } dvbRcsRxTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION Combes Expires November 7, 2009 [Page 33] Internet-Draft DVB-RCS MIB May 2009 "Index for the LNB type." ::={dvbRcsOduRxTypeEntry 1} dvbRcsRxTypeDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Text based identification of an LNB type." ::={dvbRcsOduRxTypeEntry 2} dvbRcsOduRxType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the selected LNB type." ::={dvbRcsOduRx 2} --=================================================================== -- ODU Antenna --=================================================================== dvbRcsOduAntennaTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsOduAntennaTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the identification of each well-known antenna type supported by the IDU, and provides its associated index." ::={dvbRcsOduAntenna 1} dvbRcsOduAntennaTypeEntry OBJECT-TYPE SYNTAX DvbRcsOduAntennaTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the antenna type table." INDEX { dvbRcsAntennaTypeIndex } ::={dvbRcsOduAntennaTypeTable 1} Combes Expires November 7, 2009 [Page 34] Internet-Draft DVB-RCS MIB May 2009 DvbRcsOduAntennaTypeEntry ::= SEQUENCE { dvbRcsAntennaTypeIndex Integer32, dvbRcsAntennaTypeDescription DisplayString } dvbRcsAntennaTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the antenna type." ::={dvbRcsOduAntennaTypeEntry 1} dvbRcsAntennaTypeDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Text based identification of an antenna type." ::={dvbRcsOduAntennaTypeEntry 2} dvbRcsOduAntennaType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the selected antenna type." ::={dvbRcsOduAntenna 2} --=================================================================== -- dvbRcsRcstNetwork sub-tree object types --=================================================================== dvbRcsNetworkOamIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "OAM IP Address of the RCST. This object is used with both IP and interfaces MIB-II subgroups. It uniquely determines the interface through which OAM traffic passes. Combes Expires November 7, 2009 [Page 35] Internet-Draft DVB-RCS MIB May 2009 The OAM IP address may be statically or dynamically assigned. It is system dependent whether the OAM IP address and the Traffic IP address are the same address." ::= {dvbRcsRcstNetwork 1} dvbRcsNetworkOamIpNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Network Mask for the OAM IP Address." ::= {dvbRcsRcstNetwork 2} dvbRcsNetworkOamIpAddressAssign OBJECT-TYPE SYNTAX INTEGER { oamIpAddressStatic (1), oamIpAddressDynamic (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies whether the OAM IP address is statically (1) or dynamically (2) assigned." ::= {dvbRcsRcstNetwork 3} dvbRcsNetworkLanIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the LAN interface" ::= {dvbRcsRcstNetwork 4} dvbRcsNetworkLanIpNetworkMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Mask for the LAN interface" ::= {dvbRcsRcstNetwork 5} Combes Expires November 7, 2009 [Page 36] Internet-Draft DVB-RCS MIB May 2009 dvbRcsNetworkAirInterfaceDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Default Gateway for the air interface" ::= {dvbRcsRcstNetwork 6} dvbRcsNetworkDnsServers OBJECT IDENTIFIER ::= {dvbRcsRcstNetwork 7} dvbRcsPrimaryDnsServerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the primary DNS server in the NCC." ::= {dvbRcsNetworkDnsServers 1} dvbRcsSecondaryDnsServerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the secondary DNS server in the NCC." ::= {dvbRcsNetworkDnsServers 2} dvbRcsNetworkNccMgtIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the management server in the NCC." ::= {dvbRcsRcstNetwork 8} dvbRcsNetworkConfigFileDownloadUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Full path name for the configuration file download. It includes the protocol type (tftp or ftp) and the Combes Expires November 7, 2009 [Page 37] Internet-Draft DVB-RCS MIB May 2009 associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 1738." ::= {dvbRcsRcstNetwork 9} dvbRcsNetworkInstallLogFileDownloadUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Full path of the installation log file to download. It includes the protocol type (tftp or ftp) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be created on the installer's computer and downloaded to the RCST. The format of this parameter follows RFC 1738." ::= {dvbRcsRcstNetwork 10} dvbRcsNetworkConfigFileUploadUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Full path name for the configuration file upload. It includes the protocol type (tftp or ftp) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 1738." ::= {dvbRcsRcstNetwork 11} dvbRcsNetworkLogFileUploadUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Full path of the event log file. It includes the protocol type (tftp or ftp) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 1738." Combes Expires November 7, 2009 [Page 38] Internet-Draft DVB-RCS MIB May 2009 ::= {dvbRcsRcstNetwork 12} dvbRcsNetworkInstallLogFileUploadUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Full path of the installation log file. It includes the protocol type (tftp or ftp) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be retrieved from the RCST by the NCC or by the installer via the LAN. The format of this parameter follows RFC 1738." ::= {dvbRcsRcstNetwork 13} --=================================================================== -- dvbRcsRcstInstall sub-tree object types --=================================================================== dvbRcsInstallAntennaAlignmentState OBJECT-TYPE SYNTAX INTEGER { antennaAlignmentStart (1), antennaAlignmentDeny (2), antennaAlignmentContinue(3), antennaAlignmentStop (4), antennaAlignmentSuccess (5), antennaAlignmentFail (6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the alignment state of the antenna: (1)-Start; (2)-Deny; (3)-Continue; (4)-Stop; (5)-Success; (6)-Fail" ::= {dvbRcsRcstInstall 1} dvbRcsInstallCwFrequency OBJECT-TYPE Combes Expires November 7, 2009 [Page 39] Internet-Draft DVB-RCS MIB May 2009 SYNTAX Integer32 UNITS "x100 Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency at which the transmitted Continuous Wave carrier (in 100 Hz). Minimum required precision is 1 kHz." ::= {dvbRcsRcstInstall 2} dvbRcsInstallCwMaxDuration OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Time after which the Continuous Wave carrier must be put down (in seconds)" ::= {dvbRcsRcstInstall 3} dvbRcsInstallCwPower OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "IDU TX output level when the IDU is configured to send CW. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. Reconfiguration is applied immediately to a CW." ::= {dvbRcsRcstInstall 4} dvbRcsInstallCoPolReading OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Co-Polarisation measured value during installation procedure (in 0.1 dB)" ::= {dvbRcsRcstInstall 5} Combes Expires November 7, 2009 [Page 40] Internet-Draft DVB-RCS MIB May 2009 dvbRcsInstallXPolReading OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Cross-Polarisation measured value during installation procedure (in 0.1 dB)" ::= {dvbRcsRcstInstall 6} dvbRcsInstallCoPolTarget OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Co-Polarisation target value during installation procedure (in 0.1 dB)." ::= {dvbRcsRcstInstall 7} dvbRcsInstallXPolTarget OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Cross-Polarisation target value during installation procedure (in 0.1 dB)" ::= {dvbRcsRcstInstall 8} dvbRcsInstallStandByDuration OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Time to wait in stand-by mode (in seconds)" ::= {dvbRcsRcstInstall 9} dvbRcsInstallTargetEsN0 OBJECT-TYPE SYNTAX Integer32(0..315) Combes Expires November 7, 2009 [Page 41] Internet-Draft DVB-RCS MIB May 2009 UNITS "x0.1 dB" MAX-ACCESS read-write STATUS current DESCRIPTION "This value describes the wanted Es/N0 value that enables operation of the return link with the required error performance. The values shall be given in tenth of dB and the initial value shall be equal to 7 dB. The range shall be from 0 dBm to 31.5 dBm with a precision of 0.1 dB." DEFVAL { 70 } ::= {dvbRcsRcstInstall 10} --=================================================================== -- dvbRcsRcstQos sub-tree object types --=================================================================== dvbRcsPktClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsPktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the packet classification used in the DVB-RCS terminal. The number of entries is specified by dvbRcsPktClassIndex. " ::={dvbRcsRcstQos 1} dvbRcsPktClassEntry OBJECT-TYPE SYNTAX DvbRcsPktClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the packet classification table. One object type of each entry may have a value in the active range (a non- default value).The other object types are then assumed set to 'inactive'. The entry with the lowest index value takes precedence when classifying a packet." INDEX { dvbRcsPktClassIndex } ::= {dvbRcsPktClassTable 1} DvbRcsPktClassEntry ::= SEQUENCE { dvbRcsPktClassIndex Integer32, dvbRcsPktClassDscpLow Integer32, Combes Expires November 7, 2009 [Page 42] Internet-Draft DVB-RCS MIB May 2009 dvbRcsPktClassDscpHigh Integer32, dvbRcsPktClassDscpMarkValue Integer32, dvbRcsPktClassIpProtocol Integer32, dvbRcsPktClassIpSrcAddress IpAddress, dvbRcsPktClassIpSrcAddressMask IpAddress, dvbRcsPktClassIpDstAddress IpAddress, dvbRcsPktClassIpDstAddressMask IpAddress, dvbRcsPktClassSrcPortLow Integer32, dvbRcsPktClassSrcPortHigh Integer32, dvbRcsPktClassDstPortLow Integer32, dvbRcsPktClassDstPortHigh Integer32, dvbRcsPktClassVlanUserPri Integer32, dvbRcsPktClassPhbAssociation Integer32, dvbRcsPktClassRowStatus RowStatus } dvbRcsPktClassIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index automatically incremented by one at row creation." ::={dvbRcsPktClassEntry 1} dvbRcsPktClassDscpLow OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the low value of a range of DiffServ Code Point (DSCP) values to which a packet is compared. A value of 0 is used to inactivate." DEFVAL { 0 } ::={dvbRcsPktClassEntry 2} dvbRcsPktClassDscpHigh OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the high value of a range of DiffServ Combes Expires November 7, 2009 [Page 43] Internet-Draft DVB-RCS MIB May 2009 Code Point (DSCP) values to which a packet is compared. A value of 63 is used to inactivate." DEFVAL { 63 } ::={dvbRcsPktClassEntry 3} dvbRcsPktClassDscpMarkValue OBJECT-TYPE SYNTAX Integer32 (-1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the DiffServ Code Point (DSCP) value used to mark the packet, -1 indicates no DSCP marking. Possible DSCP marks values are (0..63)" DEFVAL { -1 } ::={dvbRcsPktClassEntry 4} dvbRcsPktClassIpProtocol OBJECT-TYPE SYNTAX Integer32 (-1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP protocol to which a packet is compared. A value of 255 indicates inactive." DEFVAL { -1 } ::={dvbRcsPktClassEntry 5} dvbRcsPktClassIpSrcAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP source address to which a packet is compared." ::={dvbRcsPktClassEntry 6} dvbRcsPktClassIpSrcAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies which bits of the IP source address Combes Expires November 7, 2009 [Page 44] Internet-Draft DVB-RCS MIB May 2009 will be matched. A mask of all zeros indicates that the selectivity is inactive." DEFVAL { '00000000'H } ::={dvbRcsPktClassEntry 7} dvbRcsPktClassIpDstAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP destination address to which a packet is compared." ::={dvbRcsPktClassEntry 8} dvbRcsPktClassIpDstAddressMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies which bits of the IP destination address will be matched. A mask of all zeros indicates that the selectivity is inactive." DEFVAL { '00000000'H } ::={dvbRcsPktClassEntry 9} dvbRcsPktClassSrcPortLow OBJECT-TYPE SYNTAX Integer32 (-1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the low range of the source port to which a packet is compared. A value of -1 indicates that the selectivity is inactive." DEFVAL { -1 } ::={dvbRcsPktClassEntry 10} dvbRcsPktClassSrcPortHigh OBJECT-TYPE SYNTAX Integer32 (-1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION Combes Expires November 7, 2009 [Page 45] Internet-Draft DVB-RCS MIB May 2009 "This object specifies the high range of the source port to which a packet is compared. A value of -1 indicates that the selectivity is inactive." DEFVAL { -1 } ::={dvbRcsPktClassEntry 11} dvbRcsPktClassDstPortLow OBJECT-TYPE SYNTAX Integer32 (-1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the low range of the destination port to which a packet is compared. A value of -1 indicates that the selectivity is inactive." DEFVAL { -1 } ::={dvbRcsPktClassEntry 12} dvbRcsPktClassDstPortHigh OBJECT-TYPE SYNTAX Integer32 (-1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the high range of the destination port to which a packet is compared. A value of -1 indicates that the selectivity is inactive." DEFVAL { -1 } ::={dvbRcsPktClassEntry 13} dvbRcsPktClassVlanUserPri OBJECT-TYPE SYNTAX Integer32 (-1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the VLAN User Priority to which a packet is compared. A value of -1 indicates that the selectivity is inactive." DEFVAL { -1 } ::={dvbRcsPktClassEntry 14} dvbRcsPktClassPhbAssociation OBJECT-TYPE SYNTAX Integer32 (0..63) Combes Expires November 7, 2009 [Page 46] Internet-Draft DVB-RCS MIB May 2009 MAX-ACCESS read-create STATUS current DESCRIPTION "Associate the filter entry to a specific PHB (refer to dvbRcsPhbIdentifier)." ::={dvbRcsPktClassEntry 15} dvbRcsPktClassRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Standard SNMP row status" ::={dvbRcsPktClassEntry 16} --=================================================================== -- dvbRcsPhbMappingTable --=================================================================== dvbRcsPhbMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsPhbMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a list of Per-Hop Behaviour (PHB) MIB entries. It describes the PHB mapping to the Request Class." ::={dvbRcsRcstQos 2} dvbRcsPhbMappingEntry OBJECT-TYPE SYNTAX DvbRcsPhbMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the PHB mapping table." INDEX {dvbRcsPhbIdentifier} ::= {dvbRcsPhbMappingTable 1} DvbRcsPhbMappingEntry ::= SEQUENCE { dvbRcsPhbIdentifier Integer32, dvbRcsPhbName DisplayString, dvbRcsPhbRequestClassAssociation Integer32, dvbRcsPhbMappingRowStatus RowStatus Combes Expires November 7, 2009 [Page 47] Internet-Draft DVB-RCS MIB May 2009 } dvbRcsPhbIdentifier OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identification of the Per-Hop Behaviour (PHB) (1..64)." ::={dvbRcsPhbMappingEntry 1} dvbRcsPhbName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the Per-Hop Behaviour (PHB)." ::={dvbRcsPhbMappingEntry 2} dvbRcsPhbRequestClassAssociation OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is an association of this Per-Hop Behaviour (PHB) to a Request class (by reference to a Request Class index)." ::={dvbRcsPhbMappingEntry 3} dvbRcsPhbMappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Standard SNMP row status" DEFVAL { active } ::={dvbRcsPhbMappingEntry 4} --=================================================================== -- dvbRcsRequestClassTable Combes Expires November 7, 2009 [Page 48] Internet-Draft DVB-RCS MIB May 2009 --=================================================================== dvbRcsRequestClassTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsRequestClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a list of Request class entries. This class describes the layer 2 QoS objects." ::={dvbRcsRcstQos 3} dvbRcsRequestClassEntry OBJECT-TYPE SYNTAX DvbRcsRequestClassEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Request Class table." INDEX {dvbRcsRequestClassIndex} ::= {dvbRcsRequestClassTable 1} DvbRcsRequestClassEntry ::= SEQUENCE { dvbRcsRequestClassIndex Integer32, dvbRcsRequestClassName DisplayString, dvbRcsRequestClassChanId Integer32, dvbRcsRequestClassVccVpi Integer32, dvbRcsRequestClassVccVci Integer32, dvbRcsRequestClassPidPoolReference Integer32, dvbRcsRequestClassCra Integer32, dvbRcsRequestClassRbdcMax Integer32, dvbRcsRequestClassRbdcTimeout Integer32, dvbRcsRequestClassVbdcMax Integer32, dvbRcsRequestClassVbdcTimeout Integer32, dvbRcsRequestClassVbdcMaxBackLog Integer32, dvbRcsRequestClassRowStatus RowStatus } dvbRcsRequestClassIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Request Class table. A total of 16 entries are Combes Expires November 7, 2009 [Page 49] Internet-Draft DVB-RCS MIB May 2009 supported." ::={dvbRcsRequestClassEntry 1} dvbRcsRequestClassName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Request Class." ::={dvbRcsRequestClassEntry 2} dvbRcsRequestClassChanId OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "Channel id of the Request Class." ::={dvbRcsRequestClassEntry 3} dvbRcsRequestClassVccVpi OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Defines VPI used for the Request Class (ATM profile)." ::={dvbRcsRequestClassEntry 4} dvbRcsRequestClassVccVci OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Defines VCI used for the Request Class (ATM profile)." ::={dvbRcsRequestClassEntry 5} dvbRcsRequestClassPidPoolReference OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "Reference to the Packet IDentifier (PID) pool applicable Combes Expires November 7, 2009 [Page 50] Internet-Draft DVB-RCS MIB May 2009 for the Request Class." ::={dvbRcsRequestClassEntry 6} dvbRcsRequestClassCra OBJECT-TYPE SYNTAX Integer32 UNITS "bits/s" MAX-ACCESS read-create STATUS current DESCRIPTION "Define Continuous Rate Assignment (CRA) level for the Request Class in bit per second (bits/s)." ::={dvbRcsRequestClassEntry 7} dvbRcsRequestClassRbdcMax OBJECT-TYPE SYNTAX Integer32 UNITS "x2 kbits/s" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Rate-Based Dynamic Capacity (RBDC) that can be requested for the Request Class, in number of 2 kbits/s" ::={dvbRcsRequestClassEntry 8} dvbRcsRequestClassRbdcTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "superframes" MAX-ACCESS read-create STATUS current DESCRIPTION "Persistence of the Rate-Based Dynamic Capacity (RBDC) request, expressed in superframes" ::={dvbRcsRequestClassEntry 9} dvbRcsRequestClassVbdcMax OBJECT-TYPE SYNTAX Integer32 UNITS "ATM cells/MPEG packets" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Volume-Based Dynamic Capacity (VBDC) that can be allocated to the Request Class, in payload units (one ATM Combes Expires November 7, 2009 [Page 51] Internet-Draft DVB-RCS MIB May 2009 cell or one MPEG packet) per superframe" ::={dvbRcsRequestClassEntry 10} dvbRcsRequestClassVbdcTimeout OBJECT-TYPE SYNTAX Integer32 UNITS "superframes" MAX-ACCESS read-create STATUS current DESCRIPTION "Time after which the RCST considers that the pending requests are lost. The RCST may issue new requests for that traffic. Volume-Based Dynamic Capacity (VBDC) Timeout is expressed in superframes." ::={dvbRcsRequestClassEntry 11} dvbRcsRequestClassVbdcMaxBackLog OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "Volume-Based Dynamic Capacity (VBDC) back log per Request Class (expressed in bytes)" ::={dvbRcsRequestClassEntry 12} dvbRcsRequestClassRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Standard SNMP row status" DEFVAL { active } ::={dvbRcsRequestClassEntry 13} --=================================================================== -- The table of PID pools --=================================================================== dvbRcsPidPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsPidPoolEntry MAX-ACCESS not-accessible Combes Expires November 7, 2009 [Page 52] Internet-Draft DVB-RCS MIB May 2009 STATUS current DESCRIPTION "This table contains the Packet IDentifier (PID) pools. For MPEG profile several Request Classes may be mapped within a pool of several PIDs to allow Section Packing across Several Request Classes. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool." ::={dvbRcsRcstQos 4} dvbRcsPidPoolEntry OBJECT-TYPE SYNTAX DvbRcsPidPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the PID pool table." INDEX { dvbRcsPidPoolIndex, dvbRcsPidIndex } ::= {dvbRcsPidPoolTable 1} DvbRcsPidPoolEntry ::= SEQUENCE { dvbRcsPidPoolIndex Integer32, dvbRcsPidIndex Integer32, dvbRcsPidValue Integer32, dvbRcsPidPoolRowStatus RowStatus } dvbRcsPidPoolIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the PID pool in the PID pool table." ::={dvbRcsPidPoolEntry 1} dvbRcsPidIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the PID entry within the PID pool." ::={dvbRcsPidPoolEntry 2} Combes Expires November 7, 2009 [Page 53] Internet-Draft DVB-RCS MIB May 2009 dvbRcsPidValue OBJECT-TYPE SYNTAX Integer32 (0..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "Defines one of the PIDs to be used in a PID pool of dvbRcsPidPoolIndex. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool." ::={dvbRcsPidPoolEntry 3} dvbRcsPidPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Standard SNMP row status" DEFVAL { active } ::={dvbRcsPidPoolEntry 4} dvbRcsQosGlobalRbdcMax OBJECT-TYPE SYNTAX Integer32 UNITS "x2 kbits/s" MAX-ACCESS read-write STATUS current DESCRIPTION "Global maximum RBDC that can be requested for the RCST, in number of 2 kbits/s." ::={dvbRcsRcstQos 5} dvbRcsQosGlobalVbdcMax OBJECT-TYPE SYNTAX Integer32 UNITS "ATM cells/MPEG packets" MAX-ACCESS read-write STATUS current DESCRIPTION "Global maximum VBDC that can be allocated to the RCST, in payload units (one ATM cell or one MPEG packet) per superframe." ::={dvbRcsRcstQos 6} Combes Expires November 7, 2009 [Page 54] Internet-Draft DVB-RCS MIB May 2009 dvbRcsQosGlobalVbdcMaxBackLog OBJECT-TYPE SYNTAX Integer32 UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "Global VBDC back log at RCST level (expressed in bytes). It is used only if the VBDC back log is not configured in the Request class (expressed in bytes)." ::={dvbRcsRcstQos 7} dvbRcsQosChannelIdStrictDispatching OBJECT-TYPE SYNTAX INTEGER { notStrict (0), strict (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the RCST will strictly follow RC association when signaled through Channel_ID in the TBTP: (0)- no strict association (1)- strict association" ::={dvbRcsRcstQos 8} --=================================================================== -- dvbRcsRcstControl sub-tree object types --=================================================================== dvbRcsCtrlRebootCommand OBJECT-TYPE SYNTAX INTEGER { idle (1), normal (2), alternate (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable shall force the RCST to reboot (1)- idle (2)- normal reboot (from current software load) Combes Expires November 7, 2009 [Page 55] Internet-Draft DVB-RCS MIB May 2009 (3)- reboot from alternate load (swap to alternate load before reboot)" DEFVAL {1} ::={dvbRcsRcstControl 1} dvbRcsCtrlRcstTxDisable OBJECT-TYPE SYNTAX INTEGER { idle (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable shall force the RCST to stop transmission (transmit disabled as defined in SatLabs System Recommendations): (1)- idle (2)- initiate Tx Disabled" DEFVAL {1} ::={dvbRcsRcstControl 2} dvbRcsCtrlUserTrafficDisable OBJECT-TYPE SYNTAX INTEGER { idle (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable shall disable user traffic (only RCST management traffic can be transmitted) (1)- idle (2)- disable user traffic" DEFVAL {1} ::={dvbRcsRcstControl 3} dvbRcsCtrlCwEnable OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } Combes Expires November 7, 2009 [Page 56] Internet-Draft DVB-RCS MIB May 2009 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable will force the RCST to start transmission of CW, if the RCST is first set to the installation state, and is properly configured for CW transmission: (1)- off (2)- on" DEFVAL {1} ::={dvbRcsRcstControl 4} dvbRcsCtrlOduTxReferenceEnable OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables activation and deactivation of 10 MHz reference clock in the Tx IFL cable: (1) off (2) on" DEFVAL {2} ::={dvbRcsRcstControl 5} dvbRcsCtrlOduTxDCEnable OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables activation and deactivation of DC in the Tx IFL cable: (1) off (2) on" DEFVAL {2} ::={dvbRcsRcstControl 6} Combes Expires November 7, 2009 [Page 57] Internet-Draft DVB-RCS MIB May 2009 dvbRcsCtrlOduRxDCEnable OBJECT-TYPE SYNTAX INTEGER { off (1), on (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables activation and deactivation of DC in the Rx IFL cable: (1) off (2) on" DEFVAL {2} ::={dvbRcsRcstControl 7} dvbRcsCtrlDownloadFileCommand OBJECT-TYPE SYNTAX INTEGER { idle (1), config (2), installationLog (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable will initiate a RCST configuration file download process (1) idle (2) download RCST configuration file from TFTP/FTP server (3) download RCST installation log file from TFTP/FTP server (INSTALL_LOG Option)" DEFVAL {1} ::={dvbRcsRcstControl 8} dvbRcsCtrlUploadFileCommand OBJECT-TYPE SYNTAX INTEGER { idle (1), config (2), eventAlarm (3), installationLog (4) } MAX-ACCESS read-write Combes Expires November 7, 2009 [Page 58] Internet-Draft DVB-RCS MIB May 2009 STATUS current DESCRIPTION "This variable will initiate a RCST upload process (1) idle (2) upload RCST configuration file to TFTP/FTP server (3) upload RCST event/alarm log file to TFTP/FTP server (4) upload RCST installation log file to TFTP/FTP server (INSTALL_LOG Option)" DEFVAL {1} ::={dvbRcsRcstControl 9} dvbRcsCtrlActivateConfigFileCommand OBJECT-TYPE SYNTAX INTEGER { idle (1), activate (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Triggers the RCST to use the configuration file and update its parameters accordingly. Some RCST implementations may require a reboot for the parameters to take effect (vendor specific). (1) Idle (2) activate" DEFVAL {1} ::={dvbRcsRcstControl 10} dvbRcsCtrlRcstLogonCommand OBJECT-TYPE SYNTAX INTEGER { idle (1), logon (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable will initiate a RCST logon (1) idle (2) initiate RCST logon" DEFVAL {1} ::={dvbRcsRcstControl 11} Combes Expires November 7, 2009 [Page 59] Internet-Draft DVB-RCS MIB May 2009 dvbRcsCtrlRcstLogoffCommand OBJECT-TYPE SYNTAX INTEGER { idle (1), logoff (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable will initiate a RCST logoff (1) idle (2) initiate RCST logoff" DEFVAL {1} ::={dvbRcsRcstControl 12} dvbRcsCtrlRcstRxReacquire OBJECT-TYPE SYNTAX INTEGER { idle (1), reacquireForwardLink (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable will force the RCST to acquire the forward link and start receiving." DEFVAL {1} ::={dvbRcsRcstControl 13} --=================================================================== -- dvbRcsRcstState sub-tree object types --=================================================================== dvbRcsRcstMode OBJECT-TYPE SYNTAX INTEGER { installation (0), operational (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the current mode of the RCST is and allows it to return to the installation mode when needed. Values for the Combes Expires November 7, 2009 [Page 60] Internet-Draft DVB-RCS MIB May 2009 RCST mode are: Installation (0) Operational (1)" ::={dvbRcsRcstState 1} dvbRcsRcstFaultStatus OBJECT-TYPE SYNTAX INTEGER { nofault (0), fault (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Provide the fault status of the terminal. The fault status management is vendor specific. Values for the Fault Status are: no fault (0) fault (1)" ::={dvbRcsRcstState 2} dvbRcsRcstFwdLinkStatus OBJECT-TYPE SYNTAX INTEGER { notAcquired (0), acquired (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the status of the RCST Forward Link. Values for the Forward Link Status are: Not acquired (0) Acquired (1)" ::={dvbRcsRcstState 3} dvbRcsRcstRtnLinkStatus OBJECT-TYPE SYNTAX INTEGER { loggedOff (0), loggedOn (1) } MAX-ACCESS read-only STATUS current Combes Expires November 7, 2009 [Page 61] Internet-Draft DVB-RCS MIB May 2009 DESCRIPTION "Provides the status of the RCST Return Link. Values for the Return Link Status are: Logged-off (0) Logged-on (1)" ::={dvbRcsRcstState 4} dvbRcsRcstLogUpdated OBJECT-TYPE SYNTAX INTEGER { noUpdate (0), logfileUpdated (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the existence of an updated event log file: No update (0) Event Log file updated (1) The RCST should remove the Event Log file updated indication as the log file is fetched by the NCC." ::={dvbRcsRcstState 5} dvbRcsRcstCurrentSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current RCST software version." ::={dvbRcsRcstState 6} dvbRcsRcstAlternateSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Alternate (backup/new) RCST software version." ::={dvbRcsRcstState 7} dvbRcsRcstActivatedConfigFileVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only Combes Expires November 7, 2009 [Page 62] Internet-Draft DVB-RCS MIB May 2009 STATUS current DESCRIPTION "Version of the most recently activated configuration file. The version is vendor specific." ::={dvbRcsRcstState 8} dvbRcsRcstDownloadedConfigFileVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the most recently downloaded configuration file. Version is vendor specific. If the value is different from dvbRcsRcstActivatedConfigFileVersion, it is pending for activation." ::={dvbRcsRcstState 9} --=================================================================== -- dvbRcsFwdConfig sub-tree object types --=================================================================== dvbRcsFwdStartTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsFwdStartEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Lists Forward Links attachment points (e.g. different for installation and operation). The table describes the forward link parameters used for the start-up stream with the NCC." ::={dvbRcsFwdConfig 1} dvbRcsFwdStartEntry OBJECT-TYPE SYNTAX DvbRcsFwdStartEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Forward Link StartConfig table." INDEX {dvbRcsFwdStartIndex} ::= {dvbRcsFwdStartTable 1} DvbRcsFwdStartEntry ::= SEQUENCE { Combes Expires November 7, 2009 [Page 63] Internet-Draft DVB-RCS MIB May 2009 dvbRcsFwdStartIndex Integer32, dvbRcsFwdStartPopId Integer32, dvbRcsFwdStartFrequency Integer32, dvbRcsFwdStartPolar INTEGER, dvbRcsFwdStartFormat INTEGER, dvbRcsFwdStartRolloff INTEGER, dvbRcsFwdStartSymbolRate Integer32, dvbRcsFwdStartInnerFec INTEGER, dvbRcsFwdStartRowStatus RowStatus } dvbRcsFwdStartIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Forward Link StartConfig table." ::={dvbRcsFwdStartEntry 1} dvbRcsFwdStartPopId OBJECT-TYPE SYNTAX Integer32 (-1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Population identifier associated with the start-up forward link: -1: any (auto) 0-65535: specific StartPopId If 'any' is set, the RCST will assume membership of any announced population ID and will commence with logon in accordance with this assumption." ::={dvbRcsFwdStartEntry 2} dvbRcsFwdStartFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "x100 kHz" MAX-ACCESS read-create STATUS current DESCRIPTION "Frequency of the start transponder carrying a Combes Expires November 7, 2009 [Page 64] Internet-Draft DVB-RCS MIB May 2009 Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiple of 100 kHz." ::={dvbRcsFwdStartEntry 3} dvbRcsFwdStartPolar OBJECT-TYPE SYNTAX INTEGER { linearHorizontal (0), linearVertical (1), circularLeft (2), circularRight (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "2-bit field giving the polarization of the start transponder carrying an Network Information Table to which any RCST shall trigger to acquire forward link: 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right" ::={dvbRcsFwdStartEntry 4} dvbRcsFwdStartFormat OBJECT-TYPE SYNTAX INTEGER { auto (-1), dvbs (0), dvbs2ccm (1), dvbs2acm (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the transmission format standard applied for the startup stream. The start transport stream carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: -1: unspecified (automatic format acquisition is assumed) 0: DVB-S (support of this value is mandatory if DVB-S Combes Expires November 7, 2009 [Page 65] Internet-Draft DVB-RCS MIB May 2009 support is claimed) 1: DVB-S2 with CCM (support of this value is mandatory if DVB-S2 CCM support is claimed) 2: DVB-S2 with VCM or ACM (support of this value is mandatory if DVB-S2 ACM support is claimed) This allows the RCST to discriminate between CCM and VCM/ACM when selecting FL. The support of automatic format selection is optional. One Or several of the other format selections must be supported, according to the claimed SatLabs profile support." ::={dvbRcsFwdStartEntry 5} dvbRcsFwdStartRolloff OBJECT-TYPE SYNTAX INTEGER { autoRolloff (0), rolloff020 (1), rolloff025 (2), rolloff035 (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the receive filter roll-off applied on the start transponder. The start transponder carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: 0: any (auto) 1: 0.20 2: 0.25 3: 0.35" ::={dvbRcsFwdStartEntry 6} dvbRcsFwdStartSymbolRate OBJECT-TYPE SYNTAX Integer32 UNITS "x100 symbols/s" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the symbol rate on the start transponder carrying a Network Information Table to which any RCST Combes Expires November 7, 2009 [Page 66] Internet-Draft DVB-RCS MIB May 2009 shall trigger to acquire forward link. Its value shall be given in multiple of 100 symbols/s." ::={dvbRcsFwdStartEntry 7} dvbRcsFwdStartInnerFec OBJECT-TYPE SYNTAX INTEGER { autoFec (-1), fecRate12 (0), fecRate23 (1), fecRate34 (2), fecRate56 (3), fecRate78 (4), fecRate89 (5), fecRate35 (6), fecRate45 (7), fecRate910 (8), fecRate25 (9), fecRate13 (10), fecRate14 (11), noInnerCode (12) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the inner Forward Error Correction used on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Supported values are: autoFec (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) Combes Expires November 7, 2009 [Page 67] Internet-Draft DVB-RCS MIB May 2009 The support of autoFec is optional." ::={dvbRcsFwdStartEntry 8} dvbRcsFwdStartRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Standard SNMP row status" DEFVAL { active } ::={dvbRcsFwdStartEntry 9} --=================================================================== -- dvbRcsFwdStatus sub-tree object types --=================================================================== dvbRcsFwdStatusPopId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Population identifier applied at log-on: 0-65535: specific StartPopId If the RCST was allowed to logon with any population, the RCST will report the base number of the announced population ID indicated by the RCS Map Table linkage descriptor used at logon." ::={dvbRcsFwdStatus 1} dvbRcsFwdStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DvbRcsFwdStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the current status of Forward Link interfaces." ::={dvbRcsFwdStatus 2} dvbRcsFwdStatusEntry OBJECT-TYPE SYNTAX DvbRcsFwdStatusEntry MAX-ACCESS not-accessible STATUS current Combes Expires November 7, 2009 [Page 68] Internet-Draft DVB-RCS MIB May 2009 DESCRIPTION "An entry in the Forward Link Status table. Each entry is associated with a physical interface. A RCST shall support at least one entry." INDEX { dvbRcsFwdStatusIndex } ::= {dvbRcsFwdStatusTable 1} DvbRcsFwdStatusEntry ::= SEQUENCE { dvbRcsFwdStatusIndex Integer32, dvbRcsFwdStatusIfReference Integer32, dvbRcsFwdStatusNetId Integer32, dvbRcsFwdStatusNetName DisplayString, dvbRcsFwdStatusFormat INTEGER, dvbRcsFwdStatusFrequency Integer32, dvbRcsFwdStatusPolar INTEGER, dvbRcsFwdStatusInnerFec INTEGER, dvbRcsFwdStatusSymbolRate Integer32, dvbRcsFwdStatusRolloff INTEGER, dvbRcsFwdStatusModulation INTEGER, dvbRcsFwdStatusFecFrame INTEGER, dvbRcsFwdStatusPilot INTEGER, dvbRcsFwdStatusBer Integer32, dvbRcsFwdStatusCnr Integer32, dvbRcsFwdStatusRxPower Integer32 } dvbRcsFwdStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the Forward Link Status table." ::={dvbRcsFwdStatusEntry 1} dvbRcsFwdStatusIfReference OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Cross reference to the interface table" ::={dvbRcsFwdStatusEntry 2} Combes Expires November 7, 2009 [Page 69] Internet-Draft DVB-RCS MIB May 2009 dvbRcsFwdStatusNetId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interactive network identifier of the forward link (from RCS Map Table)" ::={dvbRcsFwdStatusEntry 3} dvbRcsFwdStatusNetName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the interactive network of the forward link (from RCS Map Table)" ::={dvbRcsFwdStatusEntry 4} dvbRcsFwdStatusFormat OBJECT-TYPE SYNTAX INTEGER { dvbs (0), dvbs2ccm (1), dvbs2acm (2), reservedFormat (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the transmission format applied on the forward link. Supported values are (from RMT): 0: DVB-S 1: DVB-S2 using CCM 2: DVB-S2 using VCM or ACM 3: reserved" ::={dvbRcsFwdStatusEntry 5} dvbRcsFwdStatusFrequency OBJECT-TYPE SYNTAX Integer32 UNITS "x100 kHz" MAX-ACCESS read-only Combes Expires November 7, 2009 [Page 70] Internet-Draft DVB-RCS MIB May 2009 STATUS current DESCRIPTION "An estimate of the frequency of the forward link. Its value shall be given in multiple of 100 kHz." ::={dvbRcsFwdStatusEntry 6} dvbRcsFwdStatusPolar OBJECT-TYPE SYNTAX INTEGER { linearHorizontal (0), linearVertical (1), circularLeft (2), circularRight (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "2-bit field giving the polarization of the forward link (from RMT): 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular right" ::={dvbRcsFwdStatusEntry 7} dvbRcsFwdStatusInnerFec OBJECT-TYPE SYNTAX INTEGER { unknown (-1), fecRate12 (0), fecRate23 (1), fecRate34 (2), fecRate56 (3), fecRate78 (4), fecRate89 (5), fecRate35 (6), fecRate45 (7), fecRate910 (8), fecRate25 (9), fecRate13 (10), fecRate14 (11), noInnerCode (12) } Combes Expires November 7, 2009 [Page 71] Internet-Draft DVB-RCS MIB May 2009 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the inner Forward Error Correction used on the forward link for transmission to the RCST. Supported values are: unknown (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'." ::={dvbRcsFwdStatusEntry 8} dvbRcsFwdStatusSymbolRate OBJECT-TYPE SYNTAX Integer32 UNITS "x100 symbols/s" MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the symbol rate of the forward link. Its value shall be given in multiple of 100 symbol/s." ::={dvbRcsFwdStatusEntry 9} dvbRcsFwdStatusRolloff OBJECT-TYPE SYNTAX INTEGER { undefRolloff (0), rolloff020 (1), rolloff025 (2), rolloff035 (3) Combes Expires November 7, 2009 [Page 72] Internet-Draft DVB-RCS MIB May 2009 } MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the roll-off applied on the forward link. Supported values are: 0: undefined 1: 0.20 2: 0.25 3: 0.35" ::={dvbRcsFwdStatusEntry 10} dvbRcsFwdStatusModulation OBJECT-TYPE SYNTAX INTEGER { unknown (0), mBPSK (1), mQPSK (2), m8PSK (3), m16APSK (4), m32APSK (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the modulation on the forward link used for transmission to the RCST. 0: unknown 1: BPSK 2: QPSK 3: 8PSK 4: 16APSK 5: 32APSK The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'." ::={dvbRcsFwdStatusEntry 11} dvbRcsFwdStatusFecFrame OBJECT-TYPE SYNTAX INTEGER { unknown (0), shortframe (1), Combes Expires November 7, 2009 [Page 73] Internet-Draft DVB-RCS MIB May 2009 longframe (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the frame length used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Short frame 2: Normal frame The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'." ::={dvbRcsFwdStatusEntry 12} dvbRcsFwdStatusPilot OBJECT-TYPE SYNTAX INTEGER { unknown (0), pilotNotused (1), pilotUsed (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether pilots are used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Pilots are not used 2: Pilots are used The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'." ::={dvbRcsFwdStatusEntry 13} dvbRcsFwdStatusBer OBJECT-TYPE SYNTAX Integer32 UNITS "exponent of 10" MAX-ACCESS read-only STATUS current Combes Expires November 7, 2009 [Page 74] Internet-Draft DVB-RCS MIB May 2009 DESCRIPTION "Provides the RCST BER on the Forward Link in log10 units." ::={dvbRcsFwdStatusEntry 14} dvbRcsFwdStatusCnr OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the RCST CNR on the Forward Link in 0.1 dB units." ::={dvbRcsFwdStatusEntry 15} dvbRcsFwdStatusRxPower OBJECT-TYPE SYNTAX Integer32 UNITS "0.1 dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Provides the power level of the Forward Link as received at the IDU, in 0.1 dBm units." DEFVAL { -500 } ::={dvbRcsFwdStatusEntry 16} --=================================================================== -- dvbRcsRtnConfig sub-tree object types --=================================================================== dvbRcsRtnConfigMaxEirp OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Max EIRP of the RCST given in resolution of 0.1 dBm, applied when the IDU can itself set the necessary IDU TX output level e.g. when using a BUC that has a power level detector and provides sufficient feedback to the IDU." ::= {dvbRcsRtnConfig 1} dvbRcsRtnConfigDefIfLevel OBJECT-TYPE SYNTAX Integer32 Combes Expires November 7, 2009 [Page 75] Internet-Draft DVB-RCS MIB May 2009 UNITS "x0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "IDU TX output level applied in case the dvbRcsRtnConfigMaxEirp cannot be used. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm." ::= {dvbRcsRtnConfig 2} --=================================================================== -- dvbRcsRtnStatus sub-tree object types --=================================================================== dvbRcsRtnStatusEbN0 OBJECT-TYPE SYNTAX Integer32 UNITS "x0.1 dB" MAX-ACCESS read-only STATUS current DESCRIPTION "The EbN0 value reported for the return link, referenced to the regular SYNC burst transmission, in 0.1 dB units." ::= {dvbRcsRtnStatus 1} dvbRcsRtnStatusSFDuration OBJECT-TYPE SYNTAX Integer32 (250..7500) UNITS "0.1 ms" MAX-ACCESS read-only STATUS current DESCRIPTION "The duration of the currently applied return link super- frame structure, in tenths of milliseconds." ::= {dvbRcsRtnStatus 2} dvbRcsRtnStatusPayloadUnit OBJECT-TYPE SYNTAX INTEGER { unitATM (0), unitMPEG (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the payload unit used for the return link is Combes Expires November 7, 2009 [Page 76] Internet-Draft DVB-RCS MIB May 2009 ATM or MPEG." ::= {dvbRcsRtnStatus 3} --================================================================= -- conformance information --================================================================== dvbRcsRcstGroups OBJECT IDENTIFIER ::= {dvbRcsConformance 1} dvbRcsRcstCompliances OBJECT IDENTIFIER ::= {dvbRcsConformance 2} --================================================================== -- conformance statements --================================================================== dvbRcsRcstCompliance1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for DVB-RCS terminals that are compliant with SatLabs System Recommendations. " MODULE -- this module MANDATORY-GROUPS {dvbRcsRcstSystemGroup, dvbRcsRcstNetworkGroup, dvbRcsRcstInstallGroup, dvbRcsRcstQosGroup, dvbRcsRcstControlGroup, dvbRcsRcstStateGroup, dvbRcsFwdConfigGroup, dvbRcsFwdStatusGroup, dvbRcsRtnConfigGroup, dvbRcsRtnStatusGroup} GROUP dvbRcsRcstExtSystemGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the SNMPMISC option." GROUP dvbRcsRcstExtNetworkGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the SNMPMISC option." GROUP dvbRcsRcstDnsGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the DNS option." GROUP dvbRcsRcstExtInstallGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the INSTALL_LOG feature." Combes Expires November 7, 2009 [Page 77] Internet-Draft DVB-RCS MIB May 2009 GROUP dvbRcsRcstEnhancedClassifierGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the ENHCLASSIFIER feature." GROUP dvbRcsRcstMpegQosGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the MPEG_TRF option." GROUP dvbRcsRcstGlobalQosGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the RCST_PARA feature." GROUP dvbRcsRcstStrictQosGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the CHID_STRICT option." GROUP dvbRcsRcstExtControlGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the SNMPMISC option." GROUP dvbRcsRtnExtConfigGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the SNMPMISC option." GROUP dvbRcsRtnExtStatusGroup DESCRIPTION "This group is mandatory for an RCST that claims to support the SNMPMISC option." GROUP dvbRcsRcstOduListGroup DESCRIPTION "This group is mandatory for an RCST that does not provide write access to the dvbRcsSystemOdu parameters." OBJECT dvbRcsSystemOduAntennaGain MIN-ACCESS read-only DESCRIPTION "Write access is supported if the dvbRcsRcstOduListGroup is not supported." OBJECT dvbRcsSystemOduSspa MIN-ACCESS read-only Combes Expires November 7, 2009 [Page 78] Internet-Draft DVB-RCS MIB May 2009 DESCRIPTION "Write access is supported if the dvbRcsRcstOduListGroup is not supported." OBJECT dvbRcsSystemOduTxType MIN-ACCESS read-only DESCRIPTION " Write access is supported if the dvbRcsRcstOduListGroup is not supported." OBJECT dvbRcsSystemOduRxType MIN-ACCESS read-only DESCRIPTION " Write access is supported if the dvbRcsRcstOduListGroup is not supported." OBJECT dvbRcsSystemOduRxBand MIN-ACCESS read-only DESCRIPTION " Write access is supported if the dvbRcsRcstOduListGroup is not supported." OBJECT dvbRcsSystemOduRxLO MIN-ACCESS read-only DESCRIPTION " Write access is supported if the dvbRcsRcstOduListGroup is not supported." OBJECT dvbRcsSystemOduTxLO MIN-ACCESS read-only DESCRIPTION " Write access is supported if the dvbRcsRcstOduListGroup is not supported." OBJECT dvbRcsPktClassDscpLow MIN-ACCESS read-only DESCRIPTION "Create access only required if ENHCLASSIFIER support is claimed." OBJECT dvbRcsPktClassDscpHigh MIN-ACCESS read-only DESCRIPTION "Create access only required if ENHCLASSIFIER support is claimed." OBJECT dvbRcsPktClassDscpMarkValue MIN-ACCESS read-only DESCRIPTION "Create access only required if Combes Expires November 7, 2009 [Page 79] Internet-Draft DVB-RCS MIB May 2009 ENHCLASSIFIER support is claimed." OBJECT dvbRcsPhbName MIN-ACCESS read-only DESCRIPTION "Create access only required if SNMPMISC support is claimed." OBJECT dvbRcsPhbRequestClassAssociation MIN-ACCESS read-only DESCRIPTION "Create access only required if SNMPMISC support is claimed." OBJECT dvbRcsPhbMappingRowStatus MIN-ACCESS read-only DESCRIPTION "Create access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassName MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassChanId MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassVccVpi MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassVccVci MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassPidPoolReference MIN-ACCESS not-accessible DESCRIPTION "Read-only access required if MPEG option is claimed. Write access only required if also SNMPMISC Combes Expires November 7, 2009 [Page 80] Internet-Draft DVB-RCS MIB May 2009 support is claimed." OBJECT dvbRcsRequestClassCra MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassRbdcMax MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassRbdcTimeout MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassVbdcMax MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassVbdcTimeout MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassVbdcMaxBackLog MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsRequestClassRowStatus MIN-ACCESS read-only DESCRIPTION "Write access only required if SNMPMISC support is claimed." OBJECT dvbRcsPidValue MIN-ACCESS not-accessible DESCRIPTION "Read-only access required if MPEG option is claimed. Write access only required if also SNMPMISC Combes Expires November 7, 2009 [Page 81] Internet-Draft DVB-RCS MIB May 2009 support is claimed." OBJECT dvbRcsPidPoolRowStatus MIN-ACCESS not-accessible DESCRIPTION "Read-only access required if MPEG option is claimed. Write access only required if also SNMPMISC support is claimed." ::= {dvbRcsRcstCompliances 1} --================================================================== -- units of conformance --================================================================== --================================================================== -- object groups for RCST system --================================================================== dvbRcsRcstSystemGroup OBJECT-GROUP OBJECTS { dvbRcsSystemMibRevision, dvbRcsSystemSatLabsProfilesDeclaration, dvbRcsSystemSatLabsOptionsDeclaration, dvbRcsSystemSatLabsFeaturesDeclaration, dvbRcsSystemLocation, dvbRcsSystemOduAntennaGain, dvbRcsSystemOduSspa, dvbRcsSystemOduTxType, dvbRcsSystemOduRxType, dvbRcsSystemOduRxBand, dvbRcsSystemOduRxLO, dvbRcsSystemOduTxLO, dvbRcsTcpPep, dvbRcsHttpPep } STATUS current DESCRIPTION "A collection of objects providing information applicable for basic device management support." ::= {dvbRcsRcstGroups 1} dvbRcsRcstExtSystemGroup OBJECT-GROUP Combes Expires November 7, 2009 [Page 82] Internet-Draft DVB-RCS MIB May 2009 OBJECTS { dvbRcsSystemOduAntennaSize } STATUS current DESCRIPTION "A collection of objects providing information applicable for extended device management support." ::= {dvbRcsRcstGroups 2} --================================================================== -- object groups for RCST networking --================================================================== dvbRcsRcstNetworkGroup OBJECT-GROUP OBJECTS { dvbRcsNetworkOamIpAddress, dvbRcsNetworkOamIpNetworkMask, dvbRcsNetworkLanIpAddress, dvbRcsNetworkLanIpNetworkMask, dvbRcsNetworkConfigFileDownloadUrl, dvbRcsNetworkConfigFileUploadUrl, dvbRcsNetworkLogFileUploadUrl } STATUS current DESCRIPTION "A collection of objects providing basic networking management support." ::= {dvbRcsRcstGroups 3} dvbRcsRcstExtNetworkGroup OBJECT-GROUP OBJECTS { dvbRcsNetworkOamIpAddressAssign, dvbRcsNetworkAirInterfaceDefaultGateway, dvbRcsNetworkNccMgtIpAddress } STATUS current DESCRIPTION "A collection of objects providing extended networking management support." ::= {dvbRcsRcstGroups 4} dvbRcsRcstDnsGroup OBJECT-GROUP OBJECTS { dvbRcsPrimaryDnsServerIpAddress, dvbRcsSecondaryDnsServerIpAddress Combes Expires November 7, 2009 [Page 83] Internet-Draft DVB-RCS MIB May 2009 } STATUS current DESCRIPTION "IP addresses of the primary and secondary DNS servers to be used to resolve URL's as needed." ::= {dvbRcsRcstGroups 5} --================================================================== -- object groups for RCST installation --================================================================== dvbRcsRcstInstallGroup OBJECT-GROUP OBJECTS { dvbRcsInstallAntennaAlignmentState, dvbRcsInstallCwFrequency, dvbRcsInstallCwMaxDuration, dvbRcsInstallCwPower, dvbRcsInstallCoPolReading, dvbRcsInstallXPolReading, dvbRcsInstallCoPolTarget, dvbRcsInstallXPolTarget, dvbRcsInstallStandByDuration, dvbRcsInstallTargetEsN0 } STATUS current DESCRIPTION "A collection of objects providing information applicable for basic installation support." ::= {dvbRcsRcstGroups 6} dvbRcsRcstExtInstallGroup OBJECT-GROUP OBJECTS { dvbRcsNetworkInstallLogFileDownloadUrl, dvbRcsNetworkInstallLogFileUploadUrl } STATUS current DESCRIPTION "A collection of objects providing extended device installation support." ::= {dvbRcsRcstGroups 7} --================================================================== -- object groups for QOS --================================================================== Combes Expires November 7, 2009 [Page 84] Internet-Draft DVB-RCS MIB May 2009 dvbRcsRcstQosGroup OBJECT-GROUP OBJECTS { dvbRcsPktClassDscpLow, dvbRcsPktClassDscpHigh, dvbRcsPktClassDscpMarkValue, dvbRcsPktClassPhbAssociation, dvbRcsPktClassRowStatus, dvbRcsPhbName, dvbRcsPhbRequestClassAssociation, dvbRcsPhbMappingRowStatus, dvbRcsRequestClassName, dvbRcsRequestClassChanId, dvbRcsRequestClassVccVpi, dvbRcsRequestClassVccVci, dvbRcsRequestClassCra, dvbRcsRequestClassRbdcMax, dvbRcsRequestClassRbdcTimeout, dvbRcsRequestClassVbdcMax, dvbRcsRequestClassVbdcTimeout, dvbRcsRequestClassVbdcMaxBackLog, dvbRcsRequestClassRowStatus } STATUS current DESCRIPTION "A collection of objects providing basic access to QOS configuration data." ::= {dvbRcsRcstGroups 8} dvbRcsRcstEnhancedClassifierGroup OBJECT-GROUP OBJECTS { dvbRcsPktClassIpProtocol, dvbRcsPktClassIpSrcAddress, dvbRcsPktClassIpSrcAddressMask, dvbRcsPktClassIpDstAddress, dvbRcsPktClassIpDstAddressMask, dvbRcsPktClassSrcPortLow, dvbRcsPktClassSrcPortHigh, dvbRcsPktClassDstPortLow, dvbRcsPktClassDstPortHigh, dvbRcsPktClassVlanUserPri } Combes Expires November 7, 2009 [Page 85] Internet-Draft DVB-RCS MIB May 2009 STATUS current DESCRIPTION "A collection of objects providing support for management of the enhanced classifier." ::= {dvbRcsRcstGroups 9} dvbRcsRcstMpegQosGroup OBJECT-GROUP OBJECTS { dvbRcsRequestClassPidPoolReference, dvbRcsPidValue, dvbRcsPidPoolRowStatus } STATUS current DESCRIPTION "A collection of objects providing access to MPEG related link QOS configuration data." ::= {dvbRcsRcstGroups 10} dvbRcsRcstGlobalQosGroup OBJECT-GROUP OBJECTS { dvbRcsQosGlobalRbdcMax, dvbRcsQosGlobalVbdcMax, dvbRcsQosGlobalVbdcMaxBackLog } STATUS current DESCRIPTION "A collection of objects providing access to global RCST QOS configuration data." ::= {dvbRcsRcstGroups 11} dvbRcsRcstStrictQosGroup OBJECT-GROUP OBJECTS { dvbRcsQosChannelIdStrictDispatching } STATUS current DESCRIPTION "A collection of objects allowing management of strict channel ID dispatching." ::= {dvbRcsRcstGroups 12} --================================================================== -- object groups for RCST control --================================================================== dvbRcsRcstControlGroup OBJECT-GROUP OBJECTS { Combes Expires November 7, 2009 [Page 86] Internet-Draft DVB-RCS MIB May 2009 dvbRcsCtrlRebootCommand, dvbRcsCtrlUserTrafficDisable, dvbRcsCtrlCwEnable, dvbRcsCtrlDownloadFileCommand, dvbRcsCtrlUploadFileCommand, dvbRcsCtrlActivateConfigFileCommand, dvbRcsCtrlRcstRxReacquire } STATUS current DESCRIPTION "A collection of objects allowing basic RCST control." ::= {dvbRcsRcstGroups 13} dvbRcsRcstExtControlGroup OBJECT-GROUP OBJECTS { dvbRcsCtrlRcstTxDisable, dvbRcsCtrlOduTxReferenceEnable, dvbRcsCtrlOduTxDCEnable, dvbRcsCtrlOduRxDCEnable, dvbRcsCtrlRcstLogonCommand, dvbRcsCtrlRcstLogoffCommand } STATUS current DESCRIPTION "A collection of objects allowing extended RCST control." ::= {dvbRcsRcstGroups 14} --================================================================== -- object groups for RCST state --================================================================== dvbRcsRcstStateGroup OBJECT-GROUP OBJECTS { dvbRcsRcstMode, dvbRcsRcstFaultStatus, dvbRcsRcstFwdLinkStatus, dvbRcsRcstLogUpdated, dvbRcsRcstCurrentSoftwareVersion, dvbRcsRcstAlternateSoftwareVersion, dvbRcsRcstActivatedConfigFileVersion, dvbRcsRcstDownloadedConfigFileVersion Combes Expires November 7, 2009 [Page 87] Internet-Draft DVB-RCS MIB May 2009 } STATUS current DESCRIPTION "A collection of objects allowing access to RCST state." ::= {dvbRcsRcstGroups 15} --================================================================== -- object groups for forward link --================================================================== dvbRcsFwdConfigGroup OBJECT-GROUP OBJECTS { dvbRcsFwdStartPopId, dvbRcsFwdStartFrequency, dvbRcsFwdStartPolar, dvbRcsFwdStartFormat, dvbRcsFwdStartRolloff, dvbRcsFwdStartSymbolRate, dvbRcsFwdStartInnerFec, dvbRcsFwdStartRowStatus } STATUS current DESCRIPTION "A collection of objects providing basic start forward link configuration support." ::= {dvbRcsRcstGroups 16} dvbRcsFwdStatusGroup OBJECT-GROUP OBJECTS { dvbRcsFwdStatusPopId, dvbRcsFwdStatusIfReference, dvbRcsFwdStatusNetId, dvbRcsFwdStatusNetName, dvbRcsFwdStatusFormat, dvbRcsFwdStatusFrequency, dvbRcsFwdStatusPolar, dvbRcsFwdStatusInnerFec, dvbRcsFwdStatusSymbolRate, dvbRcsFwdStatusRolloff, dvbRcsFwdStatusModulation, dvbRcsFwdStatusFecFrame, dvbRcsFwdStatusPilot, Combes Expires November 7, 2009 [Page 88] Internet-Draft DVB-RCS MIB May 2009 dvbRcsFwdStatusBer, dvbRcsFwdStatusCnr, dvbRcsFwdStatusRxPower } STATUS current DESCRIPTION "A collection of objects providing forward link status." ::= {dvbRcsRcstGroups 17} --================================================================== -- object groups for return link --================================================================== dvbRcsRtnConfigGroup OBJECT-GROUP OBJECTS { dvbRcsRtnConfigDefIfLevel } STATUS current DESCRIPTION "A collection of objects providing basic return link configuration support." ::= {dvbRcsRcstGroups 18} dvbRcsRtnExtConfigGroup OBJECT-GROUP OBJECTS { dvbRcsRtnConfigMaxEirp } STATUS current DESCRIPTION "A collection of objects providing extended return link configuration support." ::= {dvbRcsRcstGroups 19} dvbRcsRtnStatusGroup OBJECT-GROUP OBJECTS { dvbRcsRtnStatusPayloadUnit } STATUS current DESCRIPTION "A collection of objects allowing access to return link status." ::= {dvbRcsRcstGroups 20} dvbRcsRtnExtStatusGroup OBJECT-GROUP Combes Expires November 7, 2009 [Page 89] Internet-Draft DVB-RCS MIB May 2009 OBJECTS { dvbRcsRcstRtnLinkStatus, dvbRcsRtnStatusEbN0, dvbRcsRtnStatusSFDuration } STATUS current DESCRIPTION "A collection of objects allowing access to extended return link status." ::= {dvbRcsRcstGroups 21} dvbRcsRcstOduListGroup OBJECT-GROUP OBJECTS { dvbRcsTxTypeDescription, dvbRcsOduTxType, dvbRcsRxTypeDescription, dvbRcsOduRxType, dvbRcsAntennaTypeDescription, dvbRcsOduAntennaType } STATUS current DESCRIPTION "A collection of objects supporting flexible selection of ODU devices." ::= { dvbRcsRcstGroups 22 } END XXX NOTE: RFC Editor please ammend the lines below to reflect copyright policy for publication of MIBs. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Combes Expires November 7, 2009 [Page 90] Internet-Draft DVB-RCS MIB May 2009 * Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 5. Security Considerations Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module. It is RECOMMENDED that implementers consider the security features provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy). Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module, is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them. Combes Expires November 7, 2009 [Page 91] Internet-Draft DVB-RCS MIB May 2009 6. IANA Considerations This document includes no request to IANA. The transmission and ifType numbers described in Section 3 have already been assigned under the smi-numbers registry. 7. Acknowledgments The authors thank Gorry Fairhurst for advice in the preparation of this document. The authors recognize this document is a collective effort of the SatLabs Group (www.satlabs.org), in particular the many corrections and suggestions brought by Juan Luis Manas. Combes Expires November 7, 2009 [Page 92] Internet-Draft DVB-RCS MIB May 2009 8. References 8.1. Normative References [IANA] Internet Assigned Numbers Authority, "Internet Assigned Numbers Authority", June 2008, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997 (BEST CURRENT PRACTICE). [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information, Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999. [RFC2863] K. McCloghrie, F. Kastenholz, "The Interfaces Group MIB", RFC 2863, June 2000. 8.2. Informative References [ISO-MPEG] ISO/IEC DIS 13818-1:2000, "Information Technology; Generic Coding of Moving Pictures and Associated Audio Information Systems", International Standardisation Organisation (ISO). [ITU-ATM] ITU-T Recommendation I.432 (all parts): "B-ISDN user- network interface - Physical layer specification". [ITU-AAL5] ITU-T Recommendation I.363-5 (1996): "B-ISDN ATM Adaptation Layer specification: Type 5 AAL". [ETSI-DAT] EN 301 192, "Digital Video Broadcasting (DVB); DVB Specifications for Data Broadcasting", European Telecommunications Standards Institute (ETSI). Combes Expires November 7, 2009 [Page 93] Internet-Draft DVB-RCS MIB May 2009 [ETSI-DVBS] EN 301 421 "Digital Video Broadcasting (DVB); Modulation and Coding for DBS satellite systems at 11/12 GHz", European Telecommunications Standards Institute (ETSI). [ETSI-DVBS2] ETSI EN 302 307 "Digital Video Broadcasting (DVB); Second generation framing structure, channel coding and modulation systems for Broadcasting, Interactive Services, News Gathering and other broadband satellite applications", European Telecommunications Standards Institute (ETSI). [ETSI-GSE] ETSI TS 102 606 "Digital Video Broadcasting (DVB); Generic Stream Encapsulation (GSE) Protocol", European Telecommunications Standards Institute (ETSI). [ETSI-RCS] ETSI 301 791 "Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems", European Telecommunications Standards Institute (ETSI). [ETSI-SI] ETSI EN 300 468 "Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB Systems", European Telecommunications Standards Institute (ETSI). [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, December 2002. [RFC4259] Montpetit, M.-J., Fairhurst, G., Clausen, H., Collini- Nocker, B., and H. Linder, "A Framework for Transmission of IP Datagrams over MPEG-2 Networks", RFC 4259, November 2005. [SATLABS] SatLabs System Recommendations. Available at www.satlabs.org. Combes Expires November 7, 2009 [Page 94] Internet-Draft DVB-RCS MIB May 2009 9. Authors' Addresses Stephane Combes ESTEC European Space Agency Keplerlaan 1 - P.O. Box 299 2200 AG Noordwijk ZH The Netherlands Email: stephane.combes@esa.int URL: telecom.esa.int Petter Chr. Amundsen VeriSat AS P.O Box 1 1330 Fornebu Norway Email: pca@verisat.no URL: www.verisat.no Micheline Lambert Advantech Satellite Networks 2341 boul. Alfred-Nobel Saint-Laurent (Montreal,)H4S 2A9 Quebec, Canada Email: micheline.lambert@advantechamt.com URL: www.advantechsatnet.com Hans-Peter Lexow STM Norway Vollsveien 21 1366 Lysaker Norway Email: hlexow@stmi.com URL: www.stmi.com 10. Disclaimer This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November Combes Expires November 7, 2009 [Page 95] Internet-Draft DVB-RCS MIB May 2009 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. 11. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document. 11.1. License for Code Components XXX NOTE: RFC Editor please ammend the lines below to reflect copyright policy for publication of MIBs. A copyright note for the Code Components is provided at the end of Section 4. In addition to the licenses granted above, Code Components are also licensed to each person who wishes to receive such a license on the terms of the "BSD License", as described below. The Legal Provisions are specified in the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Combes Expires November 7, 2009 [Page 96] Internet-Draft DVB-RCS MIB May 2009 <<< RFC Ed Note: please remove the text below, prior to publications >>> Change Log. Rev -00 * First draft, for comment by the community. Rev -01 * Second draft, for comment by the community. The MIB module is renamed DVBRCS-MIB to reflect that it covers more than solely interface issues. The MIB has been updated with * a conformance section that captures the options * structural changes and corrections to achieve this * SYNTAX refinements where applicable * UNITS declarations where applicable Document reformatted to conform to I-D format conventions. Rev -02 * Third draft, for comment by the community. Update following comments received from the ipdvb list (Gorry Fairhurst). Rev -03 * Fourth draft, for comment by the community. Update following comments received from Martin Stiemerling and complement/corrections from the SatLabs Group. Rev -04 Combes Expires November 7, 2009 [Page 97] Internet-Draft DVB-RCS MIB May 2009 * Fifth draft Corrected read-write into read-create MAXACCESS for objects in requestClassTable and pidPoolTable. Minor updates to correct format of tables and some MIB comments. Rev -05 * Sixth draft Addition of dvbRcs prefix to all descriptors, following request from MIB doctor (according to Appendix C of RFC 4181). Clarification and complements brought to ODU configuration objects (see section 3.4.1), ODU structural entities definition in dvbRcsRcstSystem group and conformance section. Modification of the interface types usage (section 3.3) in order to have alignment with Ethernet interface (dvbRcsMacLayer should count link layer packets and bytes, like Ethernet does, and not IP). Updated copyright to reflect current IETF Trust guidelines and advice from Dan Romascanu. <<> Combes Expires November 7, 2009 [Page 98]